Performance Engineered Composites
FS-FPL-4706
Publications
The following is a subject list and a chronological list of Performance Engineered
Compoite publications related to cooperative Forest Products Laboratory (FPL)
research in composite products. These publications were written to
facilitate application of new and existing technologies. Publications
are listed by subject area or in reverse chronological order by year (1998 to
1986) and alphabetically by author within each year. Publications available
online
are
Portable
Document Format (PDF) (Adobe Acrobat) files and may be accessed by following
the highlighted link. If a PDF document does not print correctly on your system,
you may need to update your printer driver (check with the manufacturer through
their website or by telephone). You may also search the full-text database of
online FPL publications for documents containing specific words or phrases by
using the search at the top of the page.
Publications by Year
| 2004 | 2003 | 2002 | 2001 | 2000 |
| 1999 | 1998 | 1997 | 1996 | 1995 |
1994 | 1993 | 1992 | 1991 | 1990 |
| 1989 | 1988 | 1987 | 1986 |
New Innovations Using Composites
- Using Composites as a Tool Toward Sustainable
Forestry
Literature on Wood-Inorganic Bound
Composites (Wood-Cement Composites)
2002
Technical Reports
Other publications
- Clemons, Craig. 2002. Wood-plastic composites in the United
States: The Interfacing of Two Industries. Forest Products Journal;
Vol. 52(6): 10-18.
- Clemons, Craig M.; Ibach, Rebecca E. 2002. Laboratory tests on fungal resistance of wood filled
polyethylene composites. In: ANTEC Annual Technical Conference Society
of Plastics Engineers; 2002 May 5-9; San Francisco CA. Volume II-Materials:
p. 2219-2222.
- Curling, Simon F.; Clausen, Carol A.; Winandy, Jerrold. 2002. Experimental method to quantify
progressive stages of decay of wood by basidiomycete fungi. International
Biodeterioration & Biodegradation: 49: (2002)
p. 13-19.
- Curling, Simon F.; Clausen, Carol A.; Winandy, Jerrold E. 2002. Relationships between mechanical
properties, weight loss, and chemical composition of wood during incipient brown-rot decay.
Forest Products Journal: July/August, p.34-39.
- Hunt, John F.; Winandy, Jerrold E. 2002. 3D Engineered fiberboard: a new
structural building product. In Proceedings of the sixth panel products symposium;
2002 October 9-11; Llandudno, Wales, UK; BioComposites Centre, UWB, Bangor,
Gwynedd, LL572UW, UK. p.106-117.
- Hunt, John F. 2002. Method of making three-dimensional laminated structures.
U.S. patent 6,352,605 B1. 2002 Mar. 5. Int. Cl. B31F 1/00; U.S. Cl. 156/211.
- Ibach, Rebecca E.; Clemons, Craig M. 2002. Biological resistance of polyethylene
composites made with chemically modified fiber or flour. In: proceedings
of the 6th Pacific Rim Bio-based Composites Symposium; 2002 Nov. 10-13; Portland
OR. Vol. 2:574-583.
- Morris, Paul I.; Winandy, Jerrold E. 2002. Limiting conditions for decay
in wood systems. In: 33rd annual meeting International Research Group on
Wood Preservation; 2002 May 12-17; Cardiff, South Wales, UK. IRG/WP 02-10421.
- Muehl. 2002. Wood-plastic signs using western juniper.
Technical report 06/02.
- Sanadi, Anand R.; Hunt, J.F.; Caulfield, D.F.; Kovacsvolgyi, G.; Destree,
B. 2002. High fiber-low matrix composites: kenaf fiber/polypropylene. In:
sixth international conference on woodfiber-plastic composites; 2001 May
15-16; Madison, WI.
Forest Products Society, Madison WI: p. 121-124.
- Stark, Nicole M.; Matuana, Laurent M. 2002. Photostabilization of wood flour filled HDPE composites.
In: ANTEC Annual Technical Conference Society of Plastics Engineers; 2002
May 5-9; San Francisco CA. Volume II-Materials: p. 2209-2213.
- Williams, RS; Winandy, JE; Feist, WC. 2002. Correlation of adhesive strength with service life of
paint applied to weathered wood. In: 9th international conference on
durability of building materials and components; 2002 March 17-20; Brisbane,
Australia.
- Winandy, JE; Lebow, PK; Murphy, JF. 2002. Predicting current serviceability and residual service
life of plywood roof sheathing using kinetics-based models. In: 9th
international conference on durability of building materials and components;
2002 March 17-20; Brisbane, Australia.
- Winandy. 2002. Thermal degradation of fire-retardant-treated plywood.
Technical report 06/02.
- Winandy, J.E.; TenWolde, A.; Falk, R.H.; Barnes, H.M. 2002. Temperature
histories of plywood roof sheathing and roof rafters as used in North American
light-framed construction. In: 2002 proceedings, 7th World Conference on
Timber Engineering (WTEC); 2002 August 12-15; Shah
Alam, Malaysia. Forest Research Institute of Malaysia; Kepong, Kuala Lumpur,
Malaysia; (3): 114-121.
- Winandy, Jerrold E. 2002. Emerging materials: what will durable materials
look like in 2020? In: Enhancing the durability of lumber and engineered
wood products; 2002 February 11-13; Kissimme, FL. Forest Products Society;
Madison WI: p. 13-18.
- Youngquist, John A. 2000. Literature review on use of nonwood plant fibers for building materials
and panels. USDA FS, Forest Products Laboratory General Technical Report;
GTR-FPL-80.
2001
- Barnes, H.M.; Winandy, J.E. 2001. Bending properties of wooden
crossarms. In: 2001 proceedings, American Wood Preserver Association; 2000 May 20-23; Minneapolis. Granbury, TX: American
Wood-Preservers' Association. 11p.
- Experimental method to quantify progressive stages of decay of wood by basidiomycete
fungi. International Biodeterioration & Biodegradation: 49: (2002)
p. 13-19.
- Curling, Simon F.; Clausen, Carol A.; Winandy, Jerrold E. 2002. Relationships between mechanical
properties, weight loss, and chemical composition of wood during incipient brown-rot decay.
Forest Products Journal: July/August, p.34-39.
- Hunt, John F.; Winandy, Jerrold E. 2002. 3D Engineered fiberboard: a new
structural building product. In Proceedings of the sixth panel products symposium;
2002 October 9-11; Llandudno, Wales, UK; BioComposites Centre, UWB, Bangor,
Gwynedd, LL57 2UW, UK. p.106-117.
- Hunt, John F. 2002. Method of making three-dimensional laminated structures.
U.S. patent 6,352,605 B1. 2002 Mar. 5. Int. Cl. B31F 1/00; U.S. Cl. 156/211.
- Ibach, Rebecca E.; Clemons, Craig M. 2002. Biological resistance of polyethylene
composites made with chemically modified fiber or flour. In: proceedings
of the 6th Pacific Rim Bio-based Composites Symposium; 2002 Nov. 10-13;Portland
OR. Vol. 2:574-583.
- Morris, Paul I.; Winandy, Jerrold E. 2002. Limiting conditions for decay
in wood systems. In: 33rd annual meeting International Research Group on
Wood Preservation; 2002 May 12-17; Cardiff, South Wales, UK. IRG/WP 02-10421.
- Muehl. 2002. Wood-plastic signs using western juniper.
Technical report 06/02.
- Sanadi, Anand R.; Hunt, J.F.; Caulfield, D.F.; Kovacsvolgyi, G.; Destree,
B. 2002. High fiber-low matrix composites: kenaf fiber/polypropylene. In:
sixth international conference on woodfiber-plastic composites; 2001 May
15-16; Madison, WI. Forest Products
Society, Madison WI: p. 121-124.
- Stark, Nicole M.; Matuana, Laurent M. 2002. Photostabilization of wood flour filled HDPE composites.
In: ANTEC Annual Technical Conference Society of Plastics Engineers; 2002
May 5-9; San Francisco CA. Volume II-Materials: p. 2209-2213.
- Williams, RS; Winandy, JE; Feist, WC. 2002. Correlation of adhesive strength with service life of
paint applied to weathered wood. In: 9th international conference on
durability of building materials and components; 2002 March 17-20; Brisbane,
Australia.
- Winandy, JE;
Lebow, PK; Murphy, JF. 2002. Predicting
current serviceability and residual service life of plywood roof sheathing
using kinetics-based models. In: 9th international conference on
durability of building materials and components; 2002 March 17-20; Brisbane,
Australia.
- Winandy. 2002. Thermal degradation
of fire-retardant-treated plywood. Technical report 06/02.
- Winandy, J.E.;
TenWolde, A.; Falk, R.H.; Barnes, H.M. 2002. Temperature
histories of plywood roof sheathing and roof rafters as used in North
American light-framed construction. In: 2002 proceedings, 7th
World Conference on Timber Engineering (WTEC); 2002 August 12-15; Shah
Alam, Malaysia. Forest Research Institute of Malaysia; Kepong, Kuala
Lumpur, Malaysia; (3): 114-121.
- Winandy, Jerrold
E. 2002. Emerging materials: what will durable materials look like in
2020? In: Enhancing the durability of lumber and engineered wood products;
2002 February 11-13; Kissimme, FL. Forest Products Society; Madison
WI: p. 13-18.
- Youngquist, John
A. 2000. Literature
review on use of nonwood plant fibers for building materials and panels. USDA
FS, Forest Products Laboratory General Technical Report; GTR-FPL-80.
- Barnes, H.M.; Winandy,
J.E. 2001. Bending
properties of wooden crossarms. In: 2001 proceedings, American Wood
Preserver Association; 2000 May 20-23; Minneapolis. Granbury, TX: American
Wood-Preservers' Association. 11p. >Clausen, Carol A.; Kartal, S. Nami;
Muehl, James. 2001. Particleboard made from remediated CCA-treated
wood: evaluation of panel properties. Forest Products Journal 51(7/8):
61-64.
- Curling, Simon; Clausen, Carol A.; Winandy, Jerrold
E. 2001. The effect of hemicellulose degradation
on the mechanical properties of wood during brown rot decay. In:
32nd Annual Meeting of the International Research Group On Wood Preservation,
Section 2 Test methodology and assessment; 2001 May 20-25; Nara, Japan.
Stockholm, Sweden IRG Secretariat: www. irg-wp.com
- Falk, Robert H.; Vos, Daniel J.; Cramer, Steven
M.; English, Brent W. 2001. Performance of fasteners in wood flour-thermoplastic
composite panels. Forest Products Journal 51(1):55-61.
- Hunt, John F.; Qiu, Yanping, inventors. 2001. Multiple-piece
Corner Post. U.S. patent 6,286,683. 2001 Sept. 11. Int. Cl. B65D 81/127;
U.S. Cl. 206/586; 206/320.
- Hunt, John F. 2001. Aparatus
for molding three-dimensional objects. U.S. patent 6,190,151. 2001
Feb. 20. Int. Cl. B28B 1/52; U.S. Cl. 425/80.1.
- Kawamoto, Sumire; Muehl, James; Williams, R. Sam.
2001. Determination of dynamic MOE of particleboards made solely from
recycled particles [Abstract]. In: 35th International Particleboard Composite
Materials Symposium and Pre-Symposium Technical Workshop; 2001 April 5-7;
Pullman, WA. Washington State University. 6 p.
- Krzysik, Andrzej M.; Muehl, James H.; Youngquist,
John A.; Franca, Fabio Spina. 2001. Medium density fiberboard made from Eucalyptus
saligna. Forest Products Journal 51(10): 47-50.
- Muehl, James H. 2001. Woodfiber-plastic composites
from underutilized species. Gen. Tech. Rep. FPL-GTR-110 (Revised). Madison,
WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory:
p.28-29.
- Nakayama, F.S.; Vinyard, S.H.; Chow, P.; Bajwa,
D.S.; Youngquist, J.A.; Muehl, J.H.; Krzysik, A.M. 2001. Guayule as a
wood preservative. Industrial Crops and Products. 14(2001): 105-111.
- Stark, Nicole. 2001. Influence of moisture absorption
on mechanical properties of wood flour-polypropylene composites. Journal
of Thermoplastic Composite Materials. 14 (September 2001): 421-432.
- Winandy, Jerrold E.; Green, Frederick III; Keefe,
Donn. 2001. Treatability problems-relationships between
anatomy, chemical composition and treatability. In: The International
Research Group On Wood Preservation; 2001 May 20-24; Nara, Japan. Stockholm,
Sweden: International Research Group Secretariat; IRG/WP 01-40213: http://www.irg-wp.com
- Winandy, Jerrold E. 2001. Thermal Degradation
of Fire-Retardant-Treated Wood: Predicting Residual Service Life. Forest
Products Journal. 51(2): 47-54.
- Winandy, Jerrold E.; Lebow, Patricia K. 2001. Modeling Strength Loss in Wood by Chemical
Composition. Part I. An Individual Component Model for Southern
Pine. Wood and Fiber Science. 33 (2): 239-254.
- Winandy, Jerrold E.; Clausen, Carol A.; Curling,
Simon F. 2001. Predicting the effects of decay on
wood properties and modeling residual service-life. In: Proceedings of
the 2nd annual conference on Durability and Disaster Mitigation in Wood-frame
Housing. 2000 Nov. 6-8. Madison WI.
- Yang, Vina; Clemons, Craig M.; Illman, Barbara.
2001. Effect of moisture exposure on fungal decay in high-density polyethylene
filled with 50 percent wood flour [Abstract]. In: Biographies and abstracts
6th international conference on woodfiber-plastic composites; 2000 May
15-16; Madison, WI. Madison WI: Forest Products Society; Booth 2: 15.
- Yang, Vina; Clemons, Craig M.; Illman, Barbara.
2001. Effect of wood decay fungi on high-density polyethylene filled with
50 percent wood flour [Abstract]. In: Biographies and abstracts 6th international
conference on woodfiber-plastic composites; 2000 May 15-16; Madison, WI.
Madison WI: Forest Products Society; Booth 3: 15.
- Youngs, Robert L.; Youngquist, John A. 2001. Forest Products Research and IUFRO History
and Potential. Forest Products Journal. 51(2): 12-19.
2000
- Chow, Poo; Bowers, Tait C.; Bajwa, Dilpreet S.;
Youngquist, John A.; Muehl, James H.; Stark, Nicole M.; Krzysik, Andrzej
M.; Quang, Li. 2000. Dimensional stability of composites from
plastics and cornstalk fibers [Abstract]. In: 5th international conference
on woodfiber-plastic composites; 2000 May 26-27; Madison, WI. Madison,
WI: Forest Products Society: 312-313.
- Chow, Poo; Lambert, Robert J.; Bowers, Charles
T.; McKenzie, Nathaniel; Youngquist, John A.; Muehl, Jim H.; Krzysik,
A.M. 2000. Physical and mechanical properties of composite panels made
from kenaf plant fibers and plastics. In: Proceedings of the 2000 International
Kenaf Symposium Hiroshima; 2000 October 13-14; Hiroshima-Prefecture, Japan.
Tokyo, Japan: Japan Kenaf Association: 139-143.
- Clausen, Carol A.; Kartal, S. Nami; Muehl, James.
2000. Properties of particleboard made from recycled
CCA-treated wood. In: The international research group on wood preservation.
2000 May 14-19; Kona, HI. Doc. IRG-WP/99-50146. Stockholm, Sweden: IRG
Secretariat: 6 p.
- Clemons, Craig; Caulfield, Dan; Sanadi, Anand;
Murugesan, Gukulavanan. 2000.
Instrumented impact testing of natural fiber reinforced thermoplastics.
In: Progress In Woodfibre-Plastic Composites Conference; 2000 May 25-26;
Toronto,
Canada. Toronto, Canada: Materials and Manufacturing Ontario: 12.
- Clemons, Craig M. 2000. Woodfiber-plastic composites
in the United States-history and current and future markets. In: Third
International
Wood and Natural Fibre Composites Symposium; 2000 September 19-20; Kassel,
Germany. Kassel, Germany: Universitat Gesamthochschule Kassel: 1-1 to
1-7.
- Falk, Robert H.; Green, David; Rammer, Douglas;
Lantz, Scott F. 2000. Engineering evaluation of 55-year-old timber
columns recycled from an industrial military building. Forest Products
Journal. 50(4):71-76.
- Falk, Robert H.; Felton, Colin; Lundin, Thomas.
2000. Effects of weathering on color loss of natural
fiber-thermoplastic composites. In: 3rd international symposium on
natural polymers and composites- ISNaPOL/2000; 2000 May 14-17; Sao Pedro,
Brazil. Sao Carlos, Brazil: Embrapa-Empresa Brasileria de Pesquisa Agropecuaria-
Embrapa Instrumentacao agropecuaria; USP- Universidade de Sao Paulo IQSC-Instituto
de quimica de Sao Carlos; UNESP - Universidade de Estado de Sao Paulo,
Faculdaded de Cencias Agronomicas: 382-385.
- Kilborn, Kenneth A.; Laufenberg, Theodore L.
2000. Evaluating opportunities for viable forest products industries in
Alaska
[Abstract]. In: Biographies & abstracts: 54th annual meeting Forest
Products Society; 2000 June 18-21; South Lake Tahoe, NV. Madison, WI:
p 55.
- Krzysik, Andrzej M.; Youngquist, John; Muehl,
James; Franca Fabio Spina. 2000. Medium density fiberboards from plantation
grown
eucalyptus saligna. In: forests and society: the role of research. Poster
abstracts, volume 3; XXI IUFRO world congress 2000; 2000 August 7-12;
Kuala Lumpur, Malaysia; p. 223.
- Mills, Thomas; Laufenberg, Theodore. 2000. Workshop Summation: Alaska Value-Added
Forest Products. In: proceedings: linking healthy forests and communities
through Alaska value-added forest products; July 2000; Gen. Tech. Report
PNW-GTR-500. Sitka, Alaska: U.S. Department of Agriculture, Forest Service,
Pacific Northwest Research Station: 317-322.
- Muehl, James H.; Krzysik, Andrzej; Youngquist,
John A.; Laufenberg, Theodore L. 2000. Juniper-based signs and rangeland
restoration [Abstract]. In: Biographies & abstracts: 54th annual meeting
Forest Products Society; 2000 June 18-21; South Lake Tahoe, NV. Madison,
WI: p 55.
- Muehl, James; Krzysik, Andrzej; Youngquist,
John A.; Chow, Poo; Bowers, Charles T.; Bajwa, Dilpreet S. 2000. Nonwoven
and
melt-blended composite panels from recycled plastics, wastepapers, and
natural fibers [Abstract]. In: Biographies & abstracts: 54th annual
meeting Forest Products Society; 2000 June 18-21; South Lake Tahoe, NV.
Madison, WI: p16..
- Nakayama, Francis S.; Chow, Poo; Bajwa, Dilpreet
S.; Youngquist, John A.; Muehl, James H.; Krzysik, Andrzej M. 2000. Preliminary investigation on the natural
durability of guayule (Parthenium argentatum)-based wood products. In:
The International Reserch Group On Wood Preservation; 2000 May 14-19;
Kona. Stockholm, Sweden: International Research Group Secretariat; IRG/WP
00-40154: irg-wp.com
- Sanadi, Anand R.; Caulfield, Daniel F.; Stark,
Nicole M.; Clemons, Craig C. 2000. Thermal
and mechanical analysis of lignocellulosic-polypropylene composites. In:
The Fifth International Conference On Woodfiber Plastics Composites; 1999
May 26-27; Madison, WI. p. 67-78.
- Stark, Nicole; Clemons, Craig. 2000. Outdoor durability
of wood-plastic composite lumber. Advanced Housing Research Center; 2000
October; Madison WI: U.S. Department of Agriculture, Forest Service, Forest
Products Laboratory: 2 p.
- Stark, Nicole M.; Sanadi, Anand R. 2000. Effects
of fiber type on the properties of wood-plastic composites. In: Progress
in woodfibre-plastic composites conference; 2000 May 245-26; Toronto,
Ontario Canada. Ontario Canada: Materials and Manufacturing: 14 p.
- Winandy, Jerrold E.; Clausen, Carol A.; Curling,
Simon F. 2000. Predicting the effects of decay on
wood properties and modeling residual service-life. In: proceedings of
the 2nd annual conference on durability and disaster mitigation in wood-frame
housing. 2000 November 6-8; Monona Terrace Convention Center, Madison
WI: Forest Products Society. 261-263.
- Winandy, Jerrold E.; Barnes, H. Michael; Hatfield,
Cherilyn A. 2000. Roof Temperature Histories in Matched Attics
in Mississippi and Wisconsin (PDF 532 KB).USDA Forest Serv. Res. Pap.
FPL-RP-589. 224 p.
- Youngs, Robert L.; Youngquist, John A. 2000.
Forest products research in IUFRO: history and future in meeting society's
needs.
In: forests and society: the role of research. Poster abstracts,
volume 3; XXI IUFRO world congress 2000; 2000 August 7-12; Kuala Lumpur,
Malaysia; 179-180.
- Youngquist, John A.; Hamilton, Thomas E. 2000. A look at the world's timber resources
and processing facilities. In: forests and society: the role of
research. Sub-plenary sessions, volume 1 A5 sustainable management of
forest resources: sustainable forest management and productivity; XXI
IUFRO world congress 2000; 2000 August 7-12; Kuala Lumpur, Malaysia; 183-194.
- Youngquist, John. 2000. Wood/polymer composites-a
state of the art review. In: forests and society: the role of research.
Abstracts of group discussions, volume 2; XXI IUFRO world congress 2000;
2000 August 7-12; Kuala Lumpur, Malaysia; p. 170.
- Zaborske, Richard R.; McClellan, Michael H.; Barbour,
Jamie; Laufenberg, Theodore L.; Shaw, Charles G. III. 2000. The Southeast Alaska Timber Resource and
Industry: What Might the Future Hold? In: proceedings: linking healthy
forests and communities through Alaska value-added forest products; July
2000; Gen. Tech. Report PNW-GTR-500. Sitka, Alaska: U.S. Department of
Agriculture, Forest Service, Pacific Northwest Research Station: p. 23-26.
1999
- Baileys, Janet K.; Marks, Brian M.; Ross, Alan
S.; Crawford, Douglas M.; Krzysik, Andrzej M.; Muehl, James H.; Youngquist,
John A. 1999. Providing moisture and fungal protection to wood-based composites
[Abstract]. In: Biographies and abstracts: Forest Products Society 53rd
annual meeting; 1999 June 27-30; Boise, ID. Madison, WI: Forest Products
Society: 16 p.
- Chow, Poo; Harp, Timothy; Youngquist, John A.;
Muehl, James H.; Krzysik, Andrzej. 1999. Dimensional Stability and Decay Resistance
of Composite Fiberboard Made From Plantation-Grown Southern Yellow Pine.
In: ICEUPT'99: international conference on effective utilization of plantation
timber- "timber and wood composites for the next century"; 1999 May 21-23;
Chi-Tou, Taiwan ROC. Forest Products Association of ROC; 16: 115-116.
- Chow, Poo; Bowers, Tait; Bajwa, Dilpreet Singh;
Youngquist, John A.; Muehl, James H.; Krzysik, Andrzej. 1999. Mechanical Holding Power of Melt-Blend Boards
Made From Recycled Plastic and Kenaf. In: 1999 second annual American
Kenaf Society conference; 1999 February 25-26; San Antonio, TX: American
Kenaf Society.
- Clemons, Craig M.; Giacomin, A.Jeffrey; Caulfield,
Daniel F. 1999. Spherulitic structure in cellulose-fiber
reinforced polypropylene [Abstract]. In: 5th international conference
on woodfiber-plastic composites; 1999 May 26-27; Madison, WI. Madison
WI Forest Products Society: p300.
- Clemons, Craig M.; Caulfield, Daniel F.; Giacomin,
A.Jeffrey. 1999. Dynamic fracture toughness of cellulose-fiber-reinforced
polypropylene: preliminary investigation of microstructural effects. Journal
of Elastomers and Plastics. Vol. 31; October 1999, pg. 367-378.
- Falk, Robert H.; Vos, Dan; Cramer, Steven M. 1999. The
Comparative Performance of Woodfiber-Plastic and Wood-Based Panels.
In: 5th international conference on woodfiber-plastic composites; 1999
May 26-27; Madison, WI. Madison WI Forest Products Society: 269-274.
- Falk, Robert H.; DeVisser, Donald; Cook, Standen; Stansbury, Dale.
1999. Effect of damage on the grade yield of recycled
lumber. Forest Products Journal. 49(7/8): 71-79.
- Falk, Robert H.; DeVisser, Donald; Fridley, Kenneth.
1999. Developing a grade stamp for recycled timber: A clean Washington
center technology validation project. Final report: January 30, 1999.
USDA Forest Products Laboratory, Madison, WI.
- Falk, Robert H.; Green, David. 1999. Stress grading
of recycled lumber and timber. In: 1999 structures congress: structural
engineering in the 21st century; 1999 April 18-21; New Orleans. Reston,
VA: American Society of Civil Engineers: 650-653.
- Falk, Robert H. 1999. The properties of lumber and timber recycled
from deconstructed buildings. In: PTEC'99: Pacific timber engineering
conference; 1999 March 14-18; Rotoura, New Zealand. New Zealand Forest
Research Institute Limited; Vol. 2: 255-257.
- Falk, Robert H.; Green, David; Lantz, Scott C.
1999. Evaluation of lumber recycled from an industrial
military building. Forest Products Journal; 49(5):49-55.
- Geimer, Robert L.; Kwon, Jin Heon; 1999. Flakeboard thickness swelling, Part II:
Fundamental response of board properties to steam injection pressing.
Wood and Fiber Science; 31(1): 15-27.
- Geimer, Robert L.; Evans, James W.; Setiabudi,
Dody. 1999. Flake Furnish Characterization: Modeling
Board Properties With Geometric Descriptors. In: Res. Pap. FPL-RP-577.
Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products
laboratory: 36 p.
- Horne-Brine, Preston; Falk, Robert H. 1999. Knock
on wood: real recycling opportunities are opening up. Resource Recycling.
August: 42-46.
- Hunt, John F. 1999. Know Your Fibers: Process and Properties
or (A Material Science Approach to Designing Pulp Molded Products) (PDF
253 KB) In: Proceedings, 4th international molded pulp packaging
seminar; 1999 November 19; Chicago, Il. Mequon, WI: International Molded
Pulp Environmental Packaging Association: 16 p.
- Hunt, John F. 1999. Mechanical property variables for formed
fiber packaging. In: proceedings of international molded pulp environmental
packaging association 4th international seminar on molded pulp packaging;
O'Hare Hilton, Chicago, IL, November 19, 1999.
- Hunt, John F.; Tamasy-Bano, Margit; Nyist, Heike.
1999. Part II--Modelling the Drying of Three-Dimensional
Pulp Moulded Structures--Drying Data Obtained From Flat Panels Using Virgin
and Recycled Paper Fibre. In: 4th international conference on the
development of wood science, wood technology and forestry: ICWSF99; 1999
July 14-16; Missenden Abbey, UK. High Wycombe, Buckinghamshire, UK: Fair
Print Ltd.: 195-205.
- Hunt, John F.; Vick, Charles B. 1999. Strength and processing properties of wet-formed
hardboards from recycled corrugated containers and commercial hardboard
fibers. Forest Products Journal. 49(5):69-74.
- Krzysik, Andrzej M.; Youngquist, John A.; Muehl,
Manes H.; Franca, Fabio Spina. 1999. Medium Density Fiberboards From Plantation-Grown
Eucalyptus saligna. In: ICEUPT'99: international conference on effective
utilization of plantation timber-"timber and wood composites for the next
century"; 1999 May 21-23; Chi-Tou, Taiwan ROC. Chi-Tou, Taiwan ROC: Forest
Products Association of ROC; 16: 156-160.
- Laufenberg, Theodore L.; Palka, L.C.; McNatt, J. Dobbin. 1999. Creep and Creep-Rupture Behavior of Wood-Based
Structural Panels. In: Res. Pap. FPL-RP-574. Madison, WI: U.S. Department
of Agriculture, Forest Service, Forest Products Laboratory: 20 p.
- Lebow, Patricia K.; Winandy, Jerrold E. 1999.Verification of a Kinetics-Based Model
for Long-Term Effects of Fire Retardants on Bending Strength at Elevated
Temperatures (PDF 199 KB). Wood Fiber Sci. 31(1): 49-61.
- Lebow, S.T.; Winandy, J.E. 1999. Effect of Fire-Retardant Treatment on Plywood
pH and the Relationship of pH to Strength Properties (PDF 241 KB).
Wood Sci. Technol. 33: 285-298.
- Muehl, James H.; Krzysik, Andrzej M.; Youngquist,
John A.; Chow, Poo; Bao, Zhaozhen. 1999. Performance of Hardboards Made From Kenaf.
Kenaf properties, processing and products; Mississippi State University:
Chapter 31, p. 367-379.
- Ross, Robert J.; Pellerin, Roy F.; Volny, Norbert;
Salsig, William W.; Falk, Robert H. 1999. Inspection of timber bridges using stress
wave timing nondestructive evaluation tools. Gen. Tech. Rep. FPL-GTR-114.
Madison WI: U.S. Department of Agriculture, Forest Service, Forest Products
Laboratory: 15 p.
- Stark. 1999.
- Youngquist, John
A.; Hamilton, Thomas E. 1999. Wood products utilization: a call for reflection
and innovation. Forest Products Journal; November/December: 18-27.
- Youngquist, John A. 1999. Wood-based composites and panel products. In:
Forest Products Laboratory, comp., ed. Wood handbook- wood as an engineering
material. Madison, WI: Gen Tech. Rep. FPL-GTR-113. U.S. Department of
Agriculture, Forest Service, Forest Products Laboratory: 2-30/10.
- Youngquist, John A.; Hamilton, Thomas E. 1999. The Next Century of Wood Products Utilization:
A Call for Reflection and Innovation. In: ICEUPT'99: International
Conference on Effective Utilization of Plantation Timber, Timber and
Wood Composites for the Next Century. 1999 May 21-23; Chiu-Tou, Taiwan
ROC: Forest Products Association of ROC; 16:1-9.
1998
- Caulfield, Daniel F.; Stark, Nicole; Feng, Daan;
Sanadi, Anand R. 1998. Dynamic and mechanical properties of the
agro-fiber based composites. In: Progress in woodfibre-plastic composites:
emergence of a new industry; 1998 June 01; Mississauga, Ontario. Mississauga,
Ontario, CN: Materials and Manufacturing Ontario: 8 p.
- Chow, Poo; Bajwa, Dilpreet Singh; Lu, Wen-da; Youngquist,
John A.; Stark, Nicole M.; Li Qiang; English, Brent; Cook, Charles G.
1998. Injection-Molded Composites From Kenaf and
Recycled Plastic. In: 1st annual American Kenaf Society conference
proceedings; 1998 February 26-27. San Antonio, TX. p 38-42.
- Clemons, Craig M.; Giacomin, A.Jeffrey; Caulfield,
Daniel F. 1998. Microstructure and dynamic fracture toughness
of polypropylene reinforced with cellulose fiber. In: Proceedings
of the 1998 SPE ANTEC Conference; 1998 April 26-30; Atlanta, GA. 1432-1436.
- Dramm, John R.; Skog, Kenneth E.; Spelter, Henry
N.; Myers, Gary C.; Ritter, Michael A.; Wolfe, Ronald W. 1998. Forest
Products Laboratory research program on small-diameter material. In: Gen.
Tech. Rep. FPL-GTR-110. Madison, WI: U.S. Department of Agriculture, Forest
Service, Forest Products Laboratory: 11 p.
- Geimer, Robert L.; Kwon, Jin Heon; Bolton, James.
1998. Flakeboard thickness swelling, Part I:
Stress relaxation in a flakeboard mat. Wood and Fiber Science; 30(4):
326-338.
- Hunt, John F. 1998. Know your fibers: process and properties
or a material science approach to designing pulp molded products.
In: International molded pulp environmental packaging association proceedings;
1998 June 15; Chicago, IL.
- Kwon, Jin Heon; Geimer, Robert L. 1998. Impact of steam pressing variables on the
dimensional stabilization of flakeboard. Forest Products Journal;
48(4): 55-61.
- Nyist, Heike; Hunt, John F.; Tamasy-Bano, Margit.
1998. Part 1-modeling drying of three-dimensional
pulp molded structures-experimental program. In: 11th international
drying symposium: IDS'98; 1998 August 19-22; Halkidiki, Greece. Thessaloniki,
Greece: Ziti Editions; Vol A: 349-356.
- Oksman, Kristiina; Clemons, Craig. 1998. Mechanical properties and morphology of
impact modified polypropylene-wood flour composites. Journal of
Applied Science: 67: 1503-1513.
- Simpson, William T.; Tschernitz, John L. 1998. Effect of thickness variation on warp
in high-temperature drying plantation-grown loblolly pine 2 by 4's.
Wood and Fiber Science: 30(2): 165-174.
- Winandy, Jerrold E. 1998. Using Kinetics-Based Models to Address
Serviceability Concerns for Fire Retardant Treated Wood at Elevated
In-Service Temperatures (PDF 54 KB). In: Natterer, J.; Sandoz, J-L.,
eds. Proceedings, of the 5th world conference on timber engineering;
1998 August 17-20; Montreux, Switzerland. Lausanne Switzerland: Swiss
Federal Institute of Technology: 794-795.
- Winandy, Jerrold E.; Hernandez, Roland 1998. Analytical Approach to Determining the
Effects of Incising on Bending Strength and Stiffness of Glued Laminated
Beams (PDF 989 KB). In: Proceedings, 94th annual meeting, American
Wood-Preservers' Association; 1998 May 17-19; Scottsdale, AZ. Granbury,
TX: American Wood-Preservers' Association: 98-115.
- Winandy, Jerrold E.; Lebow, Patricia K.; Nelson,
William 1998. Predicting Bending Strength of Fire-Retardant-Treated
Plywood From Screw-Withdrawal Tests (PDF 795 KB). USDA Forest Serv.
Res. Pap. FPL-RP-568. 20 p.
- Winandy, Jerrold E.; Morrell, Jeffrey J. 1998. Effects of Incising on Lumber Strength
and Stiffness: Relationships Between Incision Density and Depth,
Species, and MSR Grade (PDF 323 KB). Wood Fiber Sci. 30(2):
185-197.
- Youngquist, John A.; Baumann, Melissa G.D.; Hemingway,
Richard W.; Conner, Anthony H. 1998. USDA Forest Service research on volatile
organic compound emissions from wood products [Abstract]. In: 32nd international
particleboard composite materials symposium, abstracts of the technical
forum presentations; 1998 March 31-April 2; Washington State University,
Pullman, WA.
Back
to Top
1997
- Berger, Mark J.; Stark, Nicole M. 1997. Investigations
of species effects in an injection-molding-grade, wood-filled polypropylene.
In: Proceedings of the 4th international conference on woodfiber-plastic
composites. Forest Product Society, Madison, WI. May 12-14, 1997. P. 19-25.
- Clemons, Craig M.; Giacomin, A.Jeffrey; Koutsky,
James A. 1997. Dynamic fracture toughness of polypropylene reinforced
with cellulose fiber. Polymer Engineering and Science: 37(6): 1012-1018.
- De Souza, M.R.; Geimer, R.L.; Moslemi, A.A. 1997. Degradation of conventional and CO2-injected
cement-bonded particleboard by exposure to fungi and termites. Journal
of Tropical Forest Products: 3(1): 26-31.
- English, Brent; Stark, Nicole; Clemons, Craig.
1997. Weight reduction: wood versus mineral fillers
in polypropylene. In: Proceedings of the 4th International
Conference on Woodfiber-Plastic Composites. Forest Products Society, Madison,
WI. May 12-14, 1997. P. 237-244.
- English, Brent. 1997. Filters, Sorbents, and Geotextiles.
In: Paper and composites from agro-based resources. Boca Raton, FL.: CRC
Press: Chapter403-425.
- English, Brent. 1997. Wood-fiber reinforced plastics in construction.
In: Use of recycled wood and paper in building applications. Proceedings
of a 1996 symposium sponsored by the U.S. Department of Agriculture Forest
Service, Forest Products Laboratory and the Forest Products Society, in
cooperation with the National Association of Home Builders Research Center,
the American Forest and Paper Association, the Center for Resourceful
Building Technology, and the Environmental Building News. Proc. 7286.
Madison, WI: Forest Products Society: 79-81.
- English, Brent; Chow, Poo; and Bajwa, Dilpreet
Singh. 1997. Processing into Composites. In:
Paper and composites from agro-based resources. CRC Press Inc.: 270-299.
- Falk, Robert. 1997. Design and Performance Aspects of United
States and European Glulam. In: Proceedings of the conference
on research standardization applications, 1997 June 6; Technical University
Graz, Austria. Institute for Steel Construction, Wood Construction,
and Industrial Construction, Graz, Austria. P. C/2-1-21.
- Falk, Bob; McDonald, Kent; Winandy, Jerry E. 1997. Controlling moisture in deck lumber. Porches,
Decks and Outbuildings: The Best of Fine Homebuilding. 60-65.
- Falk, Bob. 1997. Wood recycling: opportunities for the woodwaste
resource. Forest Products Journal; 47(6): 17-22.
- Geimer, Robert L.; Herian, Victoria L.; and Xu,
Danping. 1997. Influence of juvenile wood on dimensional
stability and tensile properties of flakeboard. Wood & Fiber Science;
29(2): 103-120.
- Geimer, Robert L.; Christiansen, Alfred W. 1997. Critical variables in the rapid cure and
bonding of phenolic resins. Forest Products Journal; 46(11/12):
67-72.
- Hunt, John F.; Scott, C. Tim; Jenkins, Don; and
Hovey, Kermit. 1997. Mechanical Properties of Spaceboard Panels
and Pallets Made From Recycled Lineboard Mill Sludge. In: Proceedings,
1997 Environmental conference and exhibit, 1997 May 5-7; Minneapolis,
MN. TAPPI Press: 481-488.
- Krzysik, Andrzej M.; Youngquist, John A.; Bowers,
Harvey. 1997. Medium density fiberboard panels from
waste wood and paper. In: Proceedings of the conference: "Wood-an
ecological material". Warsaw Agricultural University, Wood Technology
Department, Warsaw, Poland. November 18, 1997.
- Muehl, James H.; Krzysik, Andrzej M. 1997. Effect of resin and wax
on mechanical and physical properties of hardboard from air-laid mats.
Drvna Industrija 48 (1) 3-9 (1997).
- Muehl, J.H.; Krzysik, A.; Youngquist, J.A.; Chow,
P.; Bao, Z. 1997.
Performance of hardboards made from kenaf. In: 5th chemical congress of
North America, 1997 November 11-15; Cancun, Quintana Roo, Mexico. #2006.
- Lantz, Scott F.; Falk, Robert H. 1997. Feasibility of recycling timber from military
industrial buildings. In: The use of recycled wood and paper
in building applications; Proceedings of a conference sponsored by the
USDA Forest Service and the Forest Products Society. Madison WI. p.
41-48.
- Laufenberg, Theodore. 1997. The future of recycled material usage
in building applications: summary of conference viewpoints. In:
the use of recycled wood and paper in building applications; Proceedings
No. 7286. Forest Products Society, Madison WI: p. 155-159.
- Oksman, Kristiina; Clemons, Craig. 1997. Effects
of elastomers and coupling agent on impact performance of wood flour-filled
polypropylene. In: Proceedings of the 4th International Conference
on Woodfiber Plastic Composites, 1997 May 12-14, Madison, WI. Forest
Products Society, Madison, WI.
- Stahl, Douglas C.; Cramer, Steven M.; Geimer,
Robert L. 1997. Effects of Microstructural Heterogeneity
in Cement Excelsior Board. Wood and Fiber Science; 29(4): 345-352.
- Stark, Nicole M.; White, Robert H.; and Clemons,
Craig M. 1997. Heat release rate of wood-plastic composites. Sampe
Journal; 33(5): 26-31.
- Stark, Nicole M. 1997. Effect of Species and Particle Size on
Properties of Wood-Flour-Filled Polypropylene Composites. In: Proceedings
of Functional Fillers; 1997 December 8-10. Intertech Conference; San
Diego, CA.
- Winandy, Jerrold E.1997. Effects of Fire Retardant Retention, Borate
Buffers, and Redrying Temperature After Treatment on Thermal-Induced
Degradation (PDF 302 KB). Forest Prod. J. 47(6): 79-86.
- Winandy, Jerrold E.; LeBow, Stan T. 1997. Effects of Ammoniacal Copper Citrate Preservative
Treatmment and Redrying on Bending Properties of Two Grades of
Southern Pine 2 by 4 Lumber (PDF 276 KB). Forest Prod. J. 47(7/8):
91-99.
- Youngquist, John A.; Kryzik, Andrzej M.; Chow,
Poo; Meimban, Roger. 1997. Properties of Composite Panels. In:
Paper and composites from agro-based resources. Boca Raton, FL.: CRC Press
Inc.: 301-336.
1996
- Burdsall, Harold H.; Youngquist, John A.; Abubakr,
Said; and Ross, Robert J. 1996. The role of forest products utilization
in forest health. In: Proceedings, 19th meeting of the forestry
panel United States/Japan Cooperative Program; Osaka, Japan. U.S. Department
of Agriculture, Forest Service, Forest Products Laboratory; March 1996.
13 p.
- Chow, Poo; and Youngquist, John A. 1996. Effects
of fiber pretreatment on the dimensional stability and rot-resistance
of hemlock fiberboards. In: CIB-ASTM-ISO-RILEM 3rd international
symposium applications of the performance concept in building; 1996 December
9-12; Tel-Aviv Israel; National Building Research Institute, Faculty of
Engineering; Technion, Haifa: Vol. 2.
- Chow, Poo; Bao, Zhaozhen; Youngquist, John A.;
Rowell, Roger M.; Muehl, James H.; and Krzysik, Andrzej M. 1996. Effects of two fiber treatments on properties
of hemlock hardboard; Forest Products Journal; July/August; 46(7/8):62-66.
- Chow, Poo; Harp, T.; Meimban, R.; Youngquist, J.A.;
Rowell, R.M. 1996. Effects of acetylation on the dimensional
stability and decay resistance of kenaf. In: The International Research
Group on Wood Preservation; West Indies; DOC. IRG/WP 96-40059; Stockholm,
Sweden; May 1996.
- Chow, Poo, Bao, Zhao Zhen; Youngquist, John A.;
Rowell, Roger; Muehl, James H.; and Krzysik, Andrzej M. 1996. Properties of hardboards made from acetylated
Aspen and Southern Pine. Wood & Fiber Science, Journal of the
Society of Wood and Science Technology, Vol. 28. April 1996. Number 2.
- Clemons, Craig M. and Giacomin, A. Jeffrey. 1996.
Dynamic fracture toughness of polypropylene reinforced with cellulose
fiber. In: ANTEC '96 Proceedings; Society of Plastic Engineers; Indianapolis
IN; May 1996; 3307-3311.
- English, Brent; Clemons, Craig M.; Stark, Nicole;
and Schnieder, James. P. 1996. Waste-wood
derived fillers for plastics. Gen. Tech. Rep. FPL-GTR-91. Madison,
WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory:
282-291.
- English, Brent; Stark, Nicole; and Clemons, Craig.
1996. Wood and mineral fillers for injection molding grade polypropylene.
USDA Forest Service, Forest Products Laboratory, Madison WI; November
1996.
- English, Brent; and Falk, Robert H. 1996. Factors
that affect the application of woodfiber-plastic composites. Woodfiber-Plastic
Composites, p. 189-194.
- English, Brent; Clemons, Craig; Stark, Nicole;
and Schneider, James. 1996. Development and Commercial Evaluation of Compounded
Waste Wood-Paper Reinforced Plastic Composite Feedstock. Final Report
to WI DNR, Project #94-55, March 1996.
- Rowell, Roger M. 1996. Composites from Agri-Based Resources (PDF
104 KB)In: Falk, Robert H., ed. Proceedings, The use of recycled wood
and paper in building applications. Proceedings No. 7286. Madison, WI:
Forest Products Society: 217-222.
- Geimer, Robert L.; de Souza, Mario Rabelo; Moslemi,
Ali A. 1996. Accelerated aging of low-density cement-bonded
composites made conventionally and with carbon dioxide injection. DRVNA
Industrija: 47(2): 55-62.
- Geimer, Robert L.; Christansen, Alfred W. 1996. Critical Variables in the Rapid Cure and
Bonding of Phenolic Resins (PDF 194 KB)
Forest Prod. J. 46(11/12): 67-72.
- Karmaker, A.C. and Youngquist, J.A. 1996. Composite system performance as influenced
by various processing techniques. In: ANTEC '96 Proceedings; Society
of Plastic Engineers; Indianapolis, IN; May 1996; 2420-2524.
- Karmaker, A.C.; Youngquist, J.A. 1996. Injection Molding of Polypropylene Reinforced
With Short Jute Fibers. Journal of Applied Polymer Science:
Vol. 62 pages 1147-1151.
- Pellerin, Roy F.; Lavinder, Jeff A.; Ross, Robert
J.; Falk, Robert H.; 1996. Nondestructive evaluation of timber bridges.
In: Nondestructive evaluation of materials and composites; 1996 December
3-5; Scottsdale, AZ: SPIE-The International Society for Optical Engineering,
Vol. 2944: 275-284.
- Pellerin, Roy F.; Lavinder, Jeff A.; Ross, Robert,
J.; Falk, Robert H.; and Volny, Norbert; 1996.
In-place detection of decay in timber bridges-an
application of stress wave technology. In: National conference on
wood transportation; 1996 October 23-25; Madison, WI. Gen. Tech. Rep.
FPL-GTR-94. Madison, WI: U.S. Department of Agriculture, Forest Service,
Forest Products Laboratory: 282-291.
- Vick, Charles B.; Geimer, Robert L.; and Wood,
James E. Jr. 1996. Flakeboards from recycled CCA-treated Southern
pine lumber. Forest Products Journal, 46(11/12): 89-91.
- Wang, X.-M.; Riedl, B.; Geimer, R.L.; Christiansen,
A.W. 1996. Phenol-formaldehyde resin curing and bonding under dynamic
conditions. Wood Science and Technology. 30(6): 423-442.
- Winandy, J.E. 1996. Effects of treatment, incising, and drying
on mechanical properties of timber. (PDF 262 KB)p 178-185.
- Winandy, Jerrold E.; Lebow, Patricia K. 1996. Kinetic Models for Thermal Degradation
of Strength of Fire-Retardant-Treated Wood (PDF 280 Kbytes). Wood
and Fiber Sci. 28(1): 39-52.
- Winandy, Jerrold E. 1996. Treatment-Processing Effects Model for
WBP-Treated Lumber (PDF 207 KB)
In: Gopu, Vijaya K.A., ed. Proceedings of the international wood engineering
conference; 1996, October 28-31; New Orleans, LA. Baton Rouge, LA: Louisiana
State University: Vol. 3: 125-133.
- Winandy, Jerrold E.1996. Serviceability Modeling of Fire-Retardant-Treated
Plywood Roof Sheathing (PDF 202 KB)
In: Proceedings of the third wood building/architecture technical seminar;
1996 Nov. 14; Seoul, Korea: Seoul, Korea: Korean Wooden Architecture Association:
46-63.
- Youngquist, John A.; Krzysik, Andrzej M.; English,
Brent W.; Spelter, Henry N.; and Chow, Poo. 1996. Agricultural Fibers for Use in Building
Components. In: The use of recycled wood and paper in building applications:
Proceedings of a 1996 symposium sponsored by the U.S. Department of Agriculture
Forest Service, Forest Products Laboratory and the Forest Products Society,
in cooperation with the National and Association of Home Builders Research
Center, the American Forest and Paper Association, the Center for Resourceful
Building Technology, and the Environmental Building News. Proc. 7286.
Madison, WI: Forest Products Society: 123-134; 1996.
1995
- Clemons, Craig. 1995. Exploratory microscopic investigation of
impacted paper fiber-reinforced polypropylene composites. Proceeds
No. 7293 Woodfiber-Plastic Composites; USDA Forest Service, University
of Toronto, University of Wisconsin and Forest Product Society; May
1-3, 1995.
- English, Brent W. and Falk, Robert H. 1995. Construction
applications of woodfiber-plastic composites. In: Proceedings of the Society
of Plastic Engineers 2nd Annual Recycling Conference; Akron,
Ohio; Nov. 2 & 3, 1995.
- English, Brent W. 1995. Geotextiles - A Specific Application of
Biofibers In: Olesen, Ole; Rexen, Finn; Larsen, Jorgen, eds. Research
in industrial application of non food crops, I: plant fibres: Proceedings
of a seminar; 1995 May; Copenhagen, Denmark. Lyngby, Denmark Academy
of Technical Sciences: 79-86.
- English, Brent W., inventor. 1995. Method for creating
plastic slivers. The United States of America as represented by the Secretary
of Agriculture, assignee. U.S. patent 5,419,500. May 30. 13 p. Int. Cl.6
B02C 19/00.
- Hunt, John F.; Noble, Robert L.; Smyrski, Rose
M. 1995. 3-D Fiber Forming - A Step Toward Engineered
Sandwich Construction. In: Allen, Howard G., ed. Pre-prints, 3d International
conference on sandwich construction; 1995 September 12-15 Southampton,
UK, 1995. 9 p. Vol. 1, sessions 1-6.
- Karmaker, A.C.; Clemons, C.M. 1995. Water absorption
and load transferring mechanisms in polypropylene reinforced with lignocellulosic
fiber. In: Proceedings: ANTEC '95; 1995 May 7-11; Boston.
- McKeever, David B.; Youngquist, John A.; and English,
Brent W. 1995. Sources and availability of recovered wood
and fiber for composite products. In: Proceedings of the particleboard
symposium; June 1995.
- Moslemi, A.A.; Souza, Mario; and Geimer, Robert.
1995. Accelerated ageing of cement-bonded particleboard. In: Proceedings
of the 4th international inorganic-bonded wood and fiber composite
materials conference; 1994 September 26-28; Spokane, WA. Forest Products
Society; 4:83-88.
- Schneider, J.P.; Myers, G.E.; Clemons, C.M.;
and English, B.W. 1995. Biofibers as reinforcing fillers in thermoplastic
composites. Journal of Vinyl & Additive Technology. 1(2): 103-108.
- Wang, X.-M.; Riedl, B.; Christiansen, A.W.; Geimer,
R.L. 1995. The effects of temperature and humidity
on phenol-formaldehyde resin bonding. Wood Science and Technology;
29(4): 253-266.
- Winandy, Jerrold E. 1995. Effects of Waterborne Preservative Treatment
of Mechanical Properties: A Review (PDF 480 Kbytes)
In: Proceedings, 91st annual meeting of American Wood-Preservers' Association;
1995, May 21-24; New York, NY. Woodstock, Maryland: American Wood-Preservers'
Association: 17-33.
- Youngquist, John A. 1995. Unlikely partners? The marriage of wood
and nonwood materials. Forest Products Journal: 45(10).
1994
- Chow, P.; Harp, T.; Miemban, R.; Youngquist,
J.A.; and Rowell, R.M. 1994. Biodegradation of acetylated Southern pine & Aspen
Composition Board. 25th Annual meeting of the international
research group on wood preservation; 1994 May 29-June 3; Bali, Indonesia.
- Clemons, C.M.; Myers, G.E.; Saeman, J.F.; and Ermer,
D.S. 1994. Waste newspaper-polypropylene composites: research- and plant-scale
studies of commercial feasibility. Wastepaper V Proceedings; 1994 March
27-30; Chicago.
- English, B.W. 1994. Biobased, biodegradable geotextiles:
USDA Forest Service research update. 1994 November 6-9. In: Proceedings
of the pacific rim biobased composites symposium; Vancouver, B.C., Canada.
- English, Brent W. 1994. Wood recycling: challenges
to the chemical industry. In: Proceedings of the chemical management resources
association fall meeting: chemicals exploiting the end-use opportunities;
1994 October 5-7; New Orleans, LA. Chemical Management Resources Association:
291-296.
- English, B.W.; and Schneider, J.P. 1994. Paper
fiber/low density polyethylene composites from recycled paper mill waste:
preliminary results. In: Proceedings of the 1994 recycling symposium;
1994 May 14-18; Boston, MA. Atlanta, GA. TAPPI Press: 119-125.
- English, Brent; 1994. Wastes into wood: composites
are a promising new resource. Environmental Health Perspectives: Journal
of the National Institute of Environmental Health Sciences; (1012) 2,
168-170.
- English, B.; Youngquist, A.M.; and Krzysik, A.M. 1994. Lignocellulosic composites.
Prepared for publication in Cellulosic Polymers, Blends and Composites; U.S.
Department of Agriculture, Forest Service, Forest Products Laboratory.
- Geimer, Robert L.; and Christiansen, Alfred W. 1994. Adhesive curing and
bonding: response to real time conditions. In: Adhesives and bonded wood
products: Proceedings of symposium; 1991 November 19-21; Seattle, WA. Proceedings
4735, Madison, WI: Forest Products Society:
12-29.
- Geimer, Robert L.; Souza, Mario R.; Moslemi, Ali A.; and Simatupang, Dr.
Maruli H. 1994. Carbon dioxide application for rapid production of cement
particleboard. In: Proceeding, inorganic bonded wood and fiber composite
materials conference; 1994 Sept. 27-30; Spokane,
WA; 40 p.
- Geimer, Robert L.; Leao, Alcides; Armbruster, Dave; and Pablo, Arturo.
1994. Property
enhancement of wood composites using gas injection. In: Proceedings
of the 28th Washington State University international particleboard-composite
material symposium; 1994 April 12-14; Pullman, WA. Washington State University:
243-259.
- Geimer, R.; Leao, Alcides; Armbruster, Dave; and Pablo, Arturo. 1994. Gas
injection pressing of wood composites. In: Proceeding. 28th international
particleboard and composite/materials symposium, Washington State Univ.,
Pullman, WA. 1994; 23p.
- Hse, Chung-Yun; Geimer, Robert L. 1994. Effect of resin type on properties
of steam-press-cured flakeboards. Forest Products Journal: 45(1): 57-62.
- Hse, Chung-Yun; Geimer, Robert L.; Hsu, Ernest, W.; Tang, R.C. 1994. Effect of resin variable on properties of
steam-press cured flakeboards. In: Adhesives and bonded wood products:
Proceedings of symposium; 1991 November 19-21; Seattle, WA. Proceedings
4735, Madison, WI: Forest Products Society: 30-44.
- Hunt, John F.; Smyrski, Rose M. 1994., Spaceboard : Today's Structural Recycled Fiber Product
s for the Future In: Proceedings, technology transfer national workshop;
1994, November 7-10; Madison, WI. Madison, WI: U.S. Department of Agriculture,
Forest Service, Forest Products Laboratory: 15-16.
- Jokerst, Ronald W.; and Geimer, Robert L. 1994. Steam-assisted hot-pressing
of construction plywood. Forest Products Journal. 44 (11): 34-36.
- Krzysik, A.; Muehl, J.; Schroeder, S.; and Wagner, L. 1994. Weathering
and finish performance of dry-process hardboards from recycled newsprint
paper fibers. A final report; October, 1994. Cooperative endeavor with American
Hardboard Association, Palatine, IL. 8 p.
- Myers, George; Clemons, Craig; and English, Brent. 1994. Melt-processed
composites from old newspapers and polypropylene. In: Progress in woodfibre-plastic
composites; 1994 April 25; Mississauga, ON; Ontario Centre for Material Research:
4p.
- Pablo, Arturo; Geimer, Robert L.; and Wood, James E. 1994. Accelerated
pressing of low-density cement-bonded board. In: Proceedings of the 4th international
inorganic-bonded wood and fiber composite materials conference; 1994 September
26-28; Spokane, WA. Forest Products Society; 4: 98-102.
- Sanadi, A.R.; Clemons, C.; Rowell, R.; and Young, R.A. 1994. Recycled newspaper
fibers as reinforcing fillers in thermoplastics: part I - analysis of tensile
and impact properties in polypropylene. Journal of Reinforced Plastics and
Composites; 13:54-67.
- Schneider, J.P.; Myers, G.E.; Clemons, C.M.; and English, B.W. 1994. Bio-fibers
as reinforcing fillers in thermoplastic composites. In Proceedings of the
1994 annual conference of the society of plastics engineers; Society of Plastics
Engineers; 2: 1840-1845.
- Schneider, James P. and Karmaker, Ajit C. 1994. Composites from jute-and
kenaf-reinforced polypropylene. In: Proceedings of the Society of Plastic
Engineers ANTEC '95; 1994 November; Brookfield, CT: Society of Plastic Engineers:
2086-2090.
- Wang, X.-M.; Riedl, B.; Christiansen, A.W.; and Geimer, R.L. 1994. Differential
scanning calorimetry of the effects of temperature and humidity on phenol-formaldehyde
resin cure. Polymer 35 (26): 5685-5692.
- Youngquist, John A. 1994. Cost effective wood-based construction products
from recycled materials. In: Progress in woodfibre-plastic composites; 1994
April 25; Mississauga, ON. Ontario Centre for Material Research: 11 p.
- Youngquist, John A.; Zerbe, John I.; and Conner, Anthony H. 1994. Opportunities
for extending the wood resource with adhesive-bonded wood products. In: Adhesives
and bonded wood symposium; 1991 November 19-21; Seattle, WA. Madison, WI:
Forest Products Society: 3-10.
- Youngquist, John A.; Myers, George E.; Muehl, James H.; Krzysik, Andrzej
M.; Clemons, Craig M; and Brown, Lisa. 1994. Composites from recycled wood and plastics.
Project summary prepared for U.S. Environmental Protection Agency, Cincinnati,
OH. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory.
20 p.
- Youngquist, J.A.; English, B.E.; Scharmer, R.C.; Chow, P.; and Shook, S.R.
1994. Literature
review on use of nonwood plant fibers for building materials and panels.
Gen. Tech. Rep. FPL-GTR-80. Madison, WI: U.S. Department of Agriculture,
Forest Service, Forest Products Laboratory.
- Youngquist, J.A.; Scharmer, R.C.; Chow, P.;and Bao, Z.Z. 1994. Density,
modulus of elasticity, creep, and durability of hardboard- a bibliography.
Bibliographies and literature of agriculture 126. U.S. Department of Agriculture,
Forest Service; Washington DC; February 1994.
1993
- Clemons, C.M.; and Myers, G.E. 1993. Properties of melt-blended composites
from post-consumer polypropylenes and wastepapers. ANTEC '93 Proceedings;
1993 May 9-13; New Orleans.
- English, B.W. 1993. Recycling paper for non-paper uses. Suitted to Proceedings
from the 1993 AICHE Annual Meeting; 1993 November 7-12; St. Louis, MO.
- Geimer, Robert L.; Clemons, Craig; and Wood, Jim. 1993. Density range of
compression molded polypropylene-wood composites. Wood and Fiber Science;
24(2):163-169.
- Geimer, Robert L.; McDonald, Kent A.; Friend, K.; and Wood, James E. 1993.
Measurement of flake alignment in flakeboard with grain angle indicator.
Res. Pap. FPL-RP-518. Madison, WI: U.S. Department of Agriculture, Forest
Service, Forest Products Laboratory: 17 p.
- Myers, G.E.; and Clemons, C.M. 1993. Wastepaper fiber in plastic composites
made by melt blending. Final report for solid waste reduction and recycling
demonstration grant program. Project #91-5, FPL Agreement FP-91-1572; Wisconsin
Department of Natural Resources; U.S.
Department of Agriculture, Forest Service, Forest Products Laboratory.
- Schneider, J.P.; and Myers, G.E. 1993. Kenaf core fiber for melt blended
composites. Final report for agreement FP-92-1881; U.S. Department of Agriculture,
Forest Service, Forest Products Laboratory.
- Young, R.A.; Rowell, R.M.; Sanadi, A.; Clemons, C. 1993. Strength properties
of composites from biobased and synthetic fibers. In: Cellulosics: Chemical,
Biochemical and Material Aspects; J.F. Kennedy, G.O. Phillips, P.A. Williams,
eds.; Ellis Horwood, New York;
66: 453-458.
- Youngquist, J.A.; Myers, G.E.; Muehl, J.M.; Krzysik, A.M.; and Clemons,
C.M. 1993. Composites from recycled wood and plastics. Final report for U.S.
Environmental Protection Agency, Project #IAG DW12934608-2; U.S. Department
of Agriculture, Forest Service, Forest Products Laboratory.
- Youngquist, J.A.; English, B.W.; Spelter, H.; and Chow, P. 1993. Agricultural
fibers in composition panels. Proceedings of Particleboard/Composite Materials
Symposium, WSU, April 1993.
- Youngquist, J.A.; English, B.W.; and Rowell, R.M. 1993. Alternative uses
for wastepaper in wood-based composite products. Suitted to Proceedings of
TAPPI Recycling Symposium; March 1993.
1992
- Clemons, Craig M.; Young, Raymond A.; Rowell, Roger. 1992. Moisture sorption
properties of composite boards from esterified aspen fiber. Wood and Fiber
Science: 23(3): 353-363.
- English, B.W. 1992. Meeting society's challenge: value added composites from recycled materials.
In: Pacific rim bio-based composites symposium proceedings. 1992 November;
Rotorua, New Zealand.
- Gonzalez, C.; Clemons, C.M.; and Myers, G.E. 1992. Effects of several ingredient
variables on mechanical properties of wood fiber-polyolefin composites blended
in a thermokinetic mixer. Proceedings of material research society; 1992
April. Spring meeting, San Francisco.
- Hunt, J.F.; Laufenberg, T.L. 1992. Three dimensional forming, a step toward
engineered 3-D structures. [Abstract] In: Proceedings of Pacific Rim biobased
composites symposium: 1992, November 9-13; Rotorua, New Zealand: New Zealand
Roest Research Institute: 1p.
- Krzysik, A.M.; Youngquist, J.A.; Muehl, J.M.; Rowell, R.M.; Chow, P.; and
Shook, S.R. 1992. Dry-process hardboards from recycled newsprint paper fibres.
Materials interactions relevant to recycling of wood-based materials; Proceedings
of materials research society; 1992
April. Spring meeting, San Francisco.
- Laufenberg, T.L., Hunt, J.F.; 1992. Recycled structural papers: new approaches
for material property improvement. In: Proceedings of Materials Research
Society Symposium: 1992, April 27-29; San Francisco,
CA Materials Research Society: 266: 237-241.
- Myers, G.E.; Clemons, C.M.; Balatinecz, J.J.; and Woodhams, R.T. 1992.
Effects of composition and polypropylene melt flow on polypropylene-waste
newspaper composites. ANTEC '92 proceedings; 1992
May 3-7; Detroit.
- Rowell, Roger M.; Clemons, Craig M. 1992. Chemical modification of wood
fiber for thermoplasticity, compatibilization with plastics, and dimensional
stability. In: Proceedings: 26th international
particleboard/composite materials symposium; March 1992; Washington State
University.
- Wegner, T.H.; Youngquist, J.A.; and Rowell, R.M. 1992. Opportunities for
composites from recycled wood based resources. Material Research Society
Symposium Proceedings; Vol. 266.
- Youngquist, J.A.; Krzysik, A.M.; Muehl, J.M.; and Carll, C.G. 1992. Properties
of wood-fiber and polymer-fiber composites. Suitted to wood-fiber composite
FPRS proceedings.
- Youngquist, J.A.; Krzysik, A.M.; Muehl, J.M.; and Carll, C.G. 1992. Mechanical
and physical properties of air-formed wood-fiber/polymer-fiber composites.
Forest Products Journal; 42(6):42-48.
1991
- Krzysik, A.M.; and Youngquist, J.A. 1991. Bonding of air-formed wood-polypropylene
fiber composites. International Journal of Adhesion and Adhesives; 11(4):235-240.
- McNatt, J. Dobbin; Laufenberg, Theodore L. 1991. Creep and creep-rupture
of plywood and oriented strandboard. In: proceedings of the 1991 international
timber engineering conference; 1991 September
2-5; London. London: TRADA; 1991: 3.457-3.464. Vol. 3.
- Vick, C.B.; Krzysik, A.M. and Wood, J.E. 1991. Acetylated, isocyanate-bonded
flakeboards after accelerated aging. Holz als Roh-und Werkstoff; 49(6):229-234.
1990
- Geimer, R.; Follensbee, R.; Christiansen, A.; Koutsky, J.; Myers, G. 1990. Resin characterization. In: Proceedings of the 24th WSU
International Particleboard/composite Materials Symposium; 1990 April
3-5; Pullman, WA. Pullman, WA: Washington State University; p. 65-83.
- Krzysik, A.M.; Myers, G.E.; Chahyadi, I.S.; and
Kolosick, P.C. 1990. Wood-polymer bonding in extruded and nonwoven
wed composite panels. In: Wood adhesives, 1990, Proceedings of a symposium
sponsored by U.S. Department of Agriculture, Forest Service, Forest Products
Laboratory and the Forest Products Research Society. Madison, WI: 183-189.
- Vick, Charles B.; De Groot, Rodney C.; Youngquist, John. 1990. Compatibility
of nonacidic waterborne preservatives with phenol-formaldehyde adhesive.
Forest Products Journal 40(2):16-22.
- Youngquist, J.A.; Rowell, R.M.; Ross, N.; Krzysik, A.M.; and Chow, P. 1990.
Effects of steam and acetylated fiber treatment, resin content, and wax on
the properties of dry-process hemlock hardboards.
Proceedings of the joint international conference on processing and utilization
of low-grade hardwoods and international trade of forest-related products;
National Taiwan University, Taiwan: 253-257.
- Youngquist, J.A.; Muehl, J.M.; Krzysik, A.M.; and Xin, T. 1990. Mechanical
and physical properties of wood/plastic fiber composites made with air-formed
dry-process technology. Proceedings of
the joint international conference on processing and utilization of low-grade
hardwoods and international trade of forest-related products; National
Taiwan University, Taiwan: 159-162.
1989
- Palardy, Robert D.; Haataja, Bruce A.; Shaler,
Stephen M.; Williams, Andrew D.; Laufenberg, Theodore L. 1989. Pressing
of wood composite panels at moderate temperature and high moisture content.
Forest Products Journal: 39 (4): 27-32.
- Krzysik, A.M. 1989. Procedures for physical property measurements of wood/polymer
mixtures. Forest Products Laboratory; internal publication.
1988
- Hunt, J.F., and Gunderson, D.E.; 1988. FPL spaceboard development.
In: Proceedings of the Tappi Corrugated Containers Conference, October 24-27;
Orlando, FL. Atlanta, GA: TAPPI Press: 11-17.
- Hunt, J.F., and Scott, C.T.; 1988. Combined board properties of FPL spaceboard
formed by a new method. Tappi Journal. 70(11): 136-141.
- Rowell, Roger M.; Youngquist, John A. 1988. Strength
tests on acetylated aspen flakeboards exposed to a brown-rot fungus. Wood
and Fiber Science, 20 (2) 1988. pg 266-271.
1987
- Laufenberg, Theodore L. 1987 Creep testing of structural composite panels: a literature review and proposed
standard. In: Maloney, Thomas M., ed. Proceedings, 21st International
particleboard/composite materials symposium; 1987 March 24-26; Pullman,
WA. Pullman, WA: Washington State University; 1987: 297-313.
- Rowell, Roger M. 1987. Treatments that enhance physical properties of wood.
Gen. Tech. Rep. FPL-GTR-55. Madison, WI: U.S. Department of Agriculture,
Forest
Service, Forest Products Laboratory: 12 p.
- Youngquist, J.A.; Myers, G.C.; Murmanis, L.L. 1987. Resin distribution
in hardboard: evaluated by internal bond strength and fluorescence microscopy.
Wood and Fiber
Sceince. 19(2): 215-224.
1986
- Gunderson, D.E., Hunt, J.F.; 1986. High-speed press drying - a comparison
of three approaches. Tappi Journal. 68(11): 114-117.
- Murmanis, Lidija; Myers, Gary C.; Youngquist, John A. 1986. Fluorescence
microscopy of hardboards. Wood and Fiber Science, 18(2): 212-219.
- Youngquist, J.A.; Rowell, R.M.; and Krzysik, A.M. 1986. Mechanical properties
and dimensional stability of acetylated aspen flakeboard. Holz als Roh-und
Werkstoff; 44(12):453-457.
- Youngquist, J.A.; Krzysik, A.M.; and Rowell, R.M. 1986. Dimensional stability
of acetylated aspen flakeboard. Wood and Fiber Science; 18(1):90-98.
Information Last Updated: January 2, 2003
|