UNIX Configuration Guidelines

1. Weak passwords

   Intruders often use finger or ruser to discover account names and then try to guess passwords. Encourage your users to choose passwords that are difficult to guess (for example, words that are not in any dictionary of any language; no proper nouns, including names of "famous" real or fictitious characters; no acronyms that are commonly used by computer professionals; no simple variations of first or last names.) Furthermore, inform your users not to leave any cleartext username/password information in files on any system.

   A good heuristic for choosing a password is to choose an easy-to-remember phrase, such as "By The Dawn's Early Light", and use the first letters to form a password. Add some punctuation or mix case letters as well. For the phrase above, one example password might be: bt}DeL{. (DO NOT use this sample phrase for your password.)

   If intruders can get a password file, they usually move or copy it to another machine and run password-guessing programs on it. These programs involve large dictionary searches, and they run quickly even on slow machines. Most systems that do not put any controls of the type of passwords used probably have at least one password that can be easily guessed.

   If you believe that your password file may have been taken, change all the passwords on the system. At the very least, you should change all system passwords because an intruder may concentrate on those and may be able to guess even a reasonably "good" password. Intruders often use compromised accounts to attempt to gain privelaged access on vulnerable systems, so we encourage you to follow the steps in

   • ftp://info.cert.org/pub/tech_tips/intruder_detection_checklist
   • ftp://info.cert.org/pub/tech_tips/root_compromise
   For further information about protecting your system from password-based attacks, see
   • ftp://info.cert.org/pub/tech_tips/passwd_file_protection
2. Accounts without passwords or default passwords

   Intruders exploit system default passwords that have not been changed since installation, including accounts with vendor-supplied default passwords. Be sure to change all default passwords when the software is installed. Also, be aware that product upgrades can quietly change account passowrds to a new default. It is best to change the passwords of default accounts after applying updates.

   Scan your password file for extra UID 0 accounts, accounts with no password, or new entries in the password file. Do not allow any accounts without passwords. Remove entries for unused accounts from the password file. To disable an account, change the password field in the /etc/passwd file to an asterisk '*' and change the login shell to /bin/false to ensure that an intruder cannot login to the account from a trusted system on the network.

3. Reusable passwords

   Even excellent passwords are not safe. They can be captured by progrmas such as packet sniffers if the passwords are sent across networks in cleartext (whether on a subnet, a local network, or the Internet). We recommend using one-time passwords, especially for authenticated access from external networks and for access to sensitive resources like name servers and routers. For more information, see Appendix B of the following advisory:

   ftp://info.cert.org/pub/cert_advisories/CA-94:01.network.monitoring.attacks

4. Use of TFTP (Trivial File Transfer Protocol) to obtain password files

   To test your system for this vulnerability, connect to your system using tftp and try

   	 get /etc/motd
   

   If you can do this, anyone else on the network can probably get your password file. To avoid the problem, disable tftpd. If you must have tftpd, ensure that it is configured with restricted access. For further information, see

   ftp://info.cert.org/pub/cert_advisories/CA-91:18.Active.Internet.tftp.Attacks

   As mentioned in Section 1 above, if you believe your password file may have been taken, the safest course is to change all passwords in the system
5. Vulnerabilities in sendmail

   There have been a number of vulnerabilities identified over the years in sendmail(8). To the best of our knowledge, the current version of sendmail addresses those known vulnerabilities.

   To determine which version of sendmail is running, use telnet to connect to the SMTP port (25) on your system:

   	 telnet <your hostname> 25
   

   We encourage you to keep up to date with the latest version of sendmail from your vendor, and ensure that it is up to date with security patches or workarounds detailed in CERT advisories advisories and bulletins. For information about the latest version of sendmail, see

   ftp://info.cert.org/pub/latest_sw_versions/sendmail

   In addition, we encourage you to use the following tools, both of which are distributed with the latest versions of sendmail:
   1. smrsh, the sendmail restricted shell, controls the way o that incoming mail messages can interact with your operating system. For instance, when configured correctly, smrsh can prevent an intruder from using pipes to execute arbitrary commands on your system.
   2. mail.local can be used to control the way in which the /bin/mail program is used on your system. This tool is described in CERT advisory CA-95:02.

      ftp://info.cert.org/pub/cert_advisories/CA-95:02.binmail.vulnerabilities

   If you are not running a recent version of sendmail, the above tools may also be obtained individually from a number of sources, including
   • ftp://info.cert.org/pub/tools/mail.local/
   • ftp://info.cert.org/pub/tools/smrsh/
   Warning: If you are running such an old version of sendmail that you must install these tools separately, intruders will continue to be able to exploit vulnerabilities that were fixed in later versions of sendmail. We urge you to upgrade to the current version of sendmail mail and then run the tools, which are included with the distribution.
6. Misconfigured anonymous FTP

   In addition to making sure that you are running the most recent version of ftpd, check your anonymous FTP configuration. It is important to follow the instructions provided with the operating system to properly configure the files and directories available through anonymous FTP (for example, file and directory permissions, ownership and group). Note that you should not use your system's standard password file or group file as the password file or group file for FTP. The anonymous FTP root directory and its two subdirectories, etc and bin, should not be owned by ftp. For more information about configuring anonymous FTP, see

   ftp://info.cert.org/pub/tech_tips/anonymous_ftp_config

7. Inappropriate network configuration file entries

   Several vendors supply /etc/hosts.equiv files with a '+' (plus sign) entry. The '+' entry should be removed from this file because it means that your system will trust all other systems. Other files that should not contain a '+' entry include all .rhosts files on the system. These files should not be world-writable.

   If your /usr/lib/X11/xdm/Xsession file includes an 'xhost' command with a '+' entry, such as

   	 /usr/bin/X11/xhost +
   

   remove that line. (Note that the 'xhost' command may be in a different directory tree on your system.) If such a line remains intact, anyone on the network can talk to the X server and potentially insert commands into windows or read console keystrokes.
8. Inappropriate 'secure' settings in /etc/ttys and /etc/ttytab

   Check the file /etc/ttys or /etc/ttytab (depending on the release of UNIX being used). The ONLY terminal that should be set to 'secure' should be the console.

9. Inappropriate entries in /etc/aliases (or /usr/lib/aliases)

   Examine the /etc/aliases (or /usr/lib/aliases) mail alias file for inappropriate entries. Some alias files include an alias named 'uudecode' or just 'decode.' If this alias exists on your system and you are not explicitly using it, then you should remove it.

10. Inappropriate file and directory protections

    Check your system documentation to establish the correct file and directory protections and ownership for system files and directories. In particular, check the '/' (root) and '/etc' directories, and all system and network configuration files. Examine file and directory protections before and after installing software or running verification utilities. These procedures can cause file and directory protections to change.

11. Old versions of system software

    Older versions of operating systems often have security vulnerabilities that are well known to intruders. To minimize your vulnerability to attacks, keep the version of your operating system up to date and apply security patches appropriate to your system(s) as soon as they become available.

    For information about software upgrades that fix security problems, their sources, and their MD5 checksums, see

    ftp://info.cert.org/pub/latest_sw_versions/

12. Use of setuid shell scripts

    Setuid shell scripts (especially setuid root) can pose potential security problems, a fact that has been well documented in many UNIX system administration texts. Do not create or allow setuid shell scripts, especially setuid root.

13. Inappropriate export settings

    Use the showmount(8) utility to check that the configuration of the /etc/exports files on your hosts are correct.

    • Wherever possible, file systems should be exported read-only.
    • Do not self-reference an NFS server in its own exports file. That is, the exports file should not export an NFS server to itself nor to any netgroups that include the NFS server.
    • Do not allow the exports file to contain a "localhost" entry.
    • Export file systems only to hosts that require them.
    • Export only to fully qualified hostnames.
    • Ensure that export lists do not exceed 256 characters (after the aliases have been expanded) or that all security patches relating to this problem have been applied.
    The CERT Coordination Center is aware that intruders are using tools that exploit a number of NFS vulnerabilities. This can result in a root compromise, depending on the vulnerability being exploited. We encourage you to limit your exposure to these attacks by implementing the security measures outlined in CERT advisory CA-94:15. For this and other information about the NFS vulnerability, see

    ftp://info.cert.org/pub/cert_advisories/CA-94:15.NFS.Vulnerabilities

14. Vulnerable protocols and services

    You may want to consider filtering certain TCP/IP services at your firewall or router. For some related suggestions, please refer to "Packet Filtering For Firewall Systems," available from

    ftp://info.cert.org/pub/tech_tips/packet_filtering

For a list of additional suggestions on removing common and known security vulnerabilities under the UNIX Operating System, see the "UNIX Computer Security Checklist" developed by the Australian Computer Emergency Response Team (AUSCERT). A copy of the AUSCERT checklist can be found in

ftp://info.cert.org/pub/tech_tips/AUSCERT_checklist1.1

• http://www.cert.org/cert.faqintro.html
• ftp://info.cert.org/pub/cert_faq