The United States Navy
header image

Fleet Ocean Tugs - T-ATF

Updated: September 15, 2003

image of USNS Apache

Description: Five ocean-going tugs are operated by Military Sealift Command and provide the U.S. Navy with towing service, and when augmented by Navy divers, assist in the recovery of downed aircraft and ships.

Features: Each vessel is equipped with 10 ton capacity crane and a bollard pull of at least 87 tons. A deck grid is fitted aft which contains 1 inch bolt receptacles spaced 24 inches apart. This allows for the bolting down of a wide variety of portable equipment. There are two GPH fire pumps supplying three fire monitors with up to 2,200 gallons of foam per minute. A deep module can be embarked to support naval salvage teams.

Background: Fleet tugs are used to tow ships, barges and targets for gunnery exercises. They are also used as platforms for salvage and diving work, as participants in naval exercises, to conduct search and rescue missions, to aid in the clean up of oil spills and ocean accidents, and to provide fire fighting assistance. USNS Apache (T-ATF 172) is the last of the Powhatan-class of ocean tugs. Apache was delivered to the Navy in 1981.

Point of Contact:
Public Affairs Office
Military Sealift Command
Washington, DC 20398-5540
(202) 685-5055 or www.msc.navy.mil

General Characteristics: Powhatan Class

Builder: Marinette Marine Corporation, Marinette, Wisc
Power Plant: 2 GM EMD 20-645F7B diesels; 5.73 MW sustained; 2 shafts; Kort nozzles; cp props; bow thruster; 300 hp (224 kW)
Length: 226 feet
Beam: 42 feet
Displacement: 2,260 tons (2,296.27 metric tons) full load
Speed: 14.5 knots (16.68 mph)
Ships: No homeports assigned
USNS Catawba (T-ATF 168)
USNS Navajo (T-ATF 169)
USNS Mohawk (T-ATF 170)
USNS Sioux(T-ATF 171)
USNS Apache (T-ATF 172)
Crew: 16 civilians and 4 Navy communications technicians


image of Navy anchor Return to the Fact File Table of contents.