Skip navigation
MedlinePlus Trusted Health Information for You U.S. National Library of MedicineNational Institutes of Health
Contact Us FAQs Site Map About MedlinePlus
español Home Health Topics Drug Information Medical Encyclopedia Dictionary News Directories Other Resources

 

Medical Encyclopedia

Other encyclopedia topics:  A-Ag  Ah-Ap  Aq-Az  B-Bk  Bl-Bz  C-Cg  Ch-Co  Cp-Cz  D-Di  Dj-Dz  E-Ep  Eq-Ez  F  G  H-Hf  Hg-Hz  I-In  Io-Iz  J  K  L-Ln  Lo-Lz  M-Mf  Mg-Mz  N  O  P-Pl  Pm-Pz  Q  R  S-Sh  Si-Sp  Sq-Sz  T-Tn  To-Tz  U  V  W  X  Y  Z  0-9 

Prothrombin time (PT)

Printer-friendly versionEmail this page to a friend
Contents of this page:

Alternative names   

PT; Pro-time

Definition    Return to top

This is a test that measures the clotting time of plasma (the liquid portion of the blood).

How the test is performed    Return to top

Blood is drawn from a vein, usually on the inside of the elbow or the back of the hand. The puncture site is cleaned with antiseptic, and an elastic band is placed around the upper arm to apply pressure and restrict blood flow through the vein. This causes veins below the band to fill with blood.

A needle is inserted into the vein, and the blood is collected in an air-tight vial or a syringe. During the procedure, the band is removed to restore circulation. Once the blood has been collected, the needle is removed, and the puncture site is covered to stop any bleeding.

For an infant or young child:
The area is cleansed with antiseptic and punctured with a sharp needle or a lancet. The blood may be collected in a pipette (small glass tube), on a slide, onto a test strip, or into a small container. Cotton or a bandage may be applied to the puncture site if there is any continued bleeding.

How to prepare for the test    Return to top

The health care provider may advise you to stop taking drugs that can affect the test (see "Special Considerations").

For infants and children:
The preparation you can provide for this test depends on your child's age, previous experiences, and level of trust. For specific information regarding how you can prepare your child, see the following topics:

How the test will feel    Return to top

When the needle is inserted to draw blood, some people feel moderate pain, while others feel only a prick or stinging sensation. Afterward, there may be some throbbing.

Why the test is performed    Return to top

The PT is a broad screening test for many types of bleeding disorders. It evaluates blood clotting disorders, usually bleeding.

Normal Values    Return to top

The normal range is 11 to 13.5 seconds ("normal" varies somewhat in different labs).

For a person on full anticoagulant therapy, the PT should be 2 to 3 times the laboratory "control" value.

What abnormal results mean    Return to top

Increased PT times may indicate:

This test may be performed under many conditions in the evaluation of a wide variety of disorders.

What the risks are    Return to top

Note: This test is often performed on people who may have bleeding problems; if so, the risk of bleeding and hematoma are slightly greater than for people without bleeding problems.

Special considerations    Return to top

Coagulation (blood clotting) results from a sequence of reactions involving several proteins known as coagulation factors. Some of these factors have other names. For example, Factor I is also called fibrinogen, Factor II is prothrombin, and Factor XII is Hageman factor. The liver produces these proteins and secretes them into the blood. In addition, vitamin K is important to blood clotting because your body converts it into prothrombin.

Some people take warfarin to keep their blood from clotting. Warfarin inhibits prothrombin, thus interrupting the clotting cascade. Because of the link between vitamin K and prothrombin, people who take warfarin need to have consistent levels of vitamin K in their diet, as instructed by their doctor.

Coagulation begins when some of the coagulation factors contact damaged tissue. Each factor reaction triggers the next reaction, in a cascade. The final product of the coagulation cascade is the blood clot.

Factor X can be activated by two different chemical-reaction sequences. The factors involved in the two sequences are referred to as the intrinsic system and the extrinsic system. In the extrinsic system, a substance called thromboplastin or tissue factor (a protein released by damaged tissues) activates factor VII.

The PT test is used to evaluate the adequacy of the extrinsic system. It measures the clotting ability of factors I (fibrinogen), II (prothrombin), V, VII, and X. When any of these factors is deficient, the PT is prolonged.

Interfering factors:

Update Date: 6/1/2003

Updated by: Marcia S. Brose, M.D., Ph.D., Division of Hematology/Oncology, Hospital of the University of Pennsylvania, Philadelphia, PA. Review provided by VeriMed Healthcare Network.

adam.com logo

The information provided herein should not be used during any medical emergency or for the diagnosis or treatment of any medical condition. A licensed physician should be consulted for diagnosis and treatment of any and all medical conditions. Call 911 for all medical emergencies. Links to other sites are provided for information only -- they do not constitute endorsements of those other sites. Copyright 2002 A.D.A.M., Inc. Any duplication or distribution of the information contained herein is strictly prohibited.