Site Preparation, Transportation,
Installation, and Inspection Before
your home is installed, make sure the site has been properly prepared. Careful attention
to the following details will help ensure satisfaction with your home for years to come.
Your retailer can provide you with valuable guidance and assistance.
Site Preparation
If you're having the home installed on your own land,
you may be responsible for site preparation. But it's also a good idea to have your
retailer or installer inspect the site.
Here's a site preparation checklist:
- The delivery truck must be able to reach the site.
- The site must be as level as possible.
- The area where the home will sit must be clear of trees,
rocks, and other debris.
- The soil must be graded and sloped away from the home for
water runoff.
- Fill soil must be compacted to prevent the foundation from
sinking or shifting.
While you may be able to do some of the site preparation,
most tasks, such as grading and compacting soil, require professional expertise.
Otherwise, you could do damage to your home that's not covered by the warranty.
Delivery
In most instances, your home will be transported from
the factory to the retail sales center. There, it will be inspected by your retailer. Any
damage done to the home in transit will be repaired before it is delivered to your
homesite.
If damage occurs on the way from the retailer to your
site, the transporter is usually held responsible. Therefore, make sure you check for
damage before the home leaves the sales center and again when your home arrives at the
site. If you find any damage, report it to the transporter immediately.
Before you finalize arrangements to buy and transport a
home, make sure you have a written warranty from the transporter. Otherwise, if damage
occurs during delivery, you could have a difficult time getting no-cost repairs.
Installation
Manufacturers must provide instructions for proper
home installation. Usually, the retailer will install your home or use a contractor.
Typically, the price of your home includes installation. You should get a written
explanation of the installation services from your retailer. Be sure to read your contract
before you sign. If installation isn't included, you may have to hire a professional. Ask
your retailer for recommendations.
Whether the retailer or a contractor installs your home,
follow these guidelines listed below. They will help you understand what you're paying for
and how to check that the work has been done properly. You'll also better understand your
warranty protections.
- Get written proof of the installers qualifications. This
may be required by state law.
- Ask if there is a written warranty for installation. If
not, have the contractor put in writing any promises or claims regarding the installation.
- Ask the contractor to explain the installation process;
have it written into the agreement.
Make sure the following six steps for installation are
included in a written itemized list before you sign the purchase contract.
1. Transporting Your Home
The manufacturer is usually responsible for transporting
the home from the factory to the retailer. The retailer or its transporter is usually
responsible for delivering the home to your site. However, if roads are inadequate or
obstacles make delivery difficult, your retailer may not be able to accept responsibility
for delivery. Have the transporter check out the route beforehand to avoid problems.
2. Building a Foundation
Your home must have a foundation. In addition to following
the manufacturers instructions and complying with local codes, ask the institution
financing your home or your rental community if they have special requirements. The
Federal Housing Administration (FHA), Veterans Administration (VA), and the Rural Housing
Service (RHS) also have special foundation requirements for homes they finance. Remind
your retailer of the kind of financing you're using so that all applicable requirements
will be met.
If you place your home on your own property, you can
choose from a number of foundation types: concrete block, metal or treated wood piers; a
concrete slab; or a full basement. A professional installer will know which local building
codes apply. Ask the installer to obtain required building permits and inspections.
3. Leveling Your Home
It's critical that your home be leveled to meet the
manufacturer's installation instructions. Otherwise, your home's weight will be unevenly
distributed. This can cause floors and walls to buckle and prevent doors and windows from
opening and closing smoothly. While the manufacturer's warranty won't cover repairs
resulting from improper leveling, a written warranty from the installer may.
Insist on a walk-through before the installer leaves.
Check for signs that your home may not be level.
Because some foundation supports may settle unevenly, it's
important to periodically check that your home stays level. The first check should be done
60 to 90 days after installation, and then once every year.
4. Securing Your Home to the
Foundation
To help minimize damage from high winds and earthquakes,
your home should be anchored to the ground or concrete footers. Anchoring must comply with
the manufacturer's instructions or as required by local codes. This is not a
"do-it-yourself" project. Ask your retailer for more information.
5. Finishing Your Home
Your home may need finishing work, such as an enclosure
around the crawl space. The enclosure must provide adequate ventilation openings at all
four corners of the home. If you have a multisection home, finishing work may include
molding and joining carpet on the interior, and siding and roofing work on the exterior.
6. Connecting Utilities
Installation should include connections to water,
electricity, gas, and sewer. If connections aren't included in the installation price,
you'll have to contract for them separately. Your retailer can help you with the
arrangements, or you can contact local authorities for more information.
Additions and Alterations to Your Home
Once your home has left the factory, the HUD Code does
not include provisions for additions and alterations. Such modifications may jeopardize
your home warranty. They may also create malfunctions or an unsafe home. An approved
addition should be a free-standing structure that meets local building codes; you may need
a permit. Contact your manufacturer, the state agency that oversees manufactured housing
in your state, the U.S. Department of Housing and Urban Development, or local building
officials for more information.
Home Inspection
Conduct an organized inspection before you move in.
Move from the exterior to the interior, carefully checking each room. Many manufacturers
provide a checklist in the owner's manual. Fill it out, date it, include additional items
that need servicing and promptly return it to the manufacturer. Keep copies for yourself.
A delay could jeopardize your warranty.
|