ANSI/MMA*

Meeting dates / 1999-09-06 (10:00)/08

Dates de la réunion

British Standards Institute (BSI)

389 Chiswick High Road

London W4 4AL

UNITED KINGDOM

Tel. : 44 181 996 7147
Fax : 44 181 996 7143
E-mail: peter_slot@bsi.org.uk

Whenever possible, the names of delegates (or observers) and the name of the head of the delegation should also be sent to the secretariat of the committee concerned at least one month before the opening of the meeting.

Dans la mesure du possible, une liste indiquant les noms des délégués (ou observateurs), ainsi que le nom du chef de la délégation, devrait également parvenir au secrétariat concerné un mois au moins avant l'ouverture de la réunion.

At the following address/A l'adresse suivante :

* Marine Machinery Association (MMA)
1383 1113 Carper Street
MCLEAN, VA 22101

USA

Tel.: + 1 703 821 2826
Fax: + 1 703 821 8249
Internet: thopkins@marmach.org

1. Opening of the meeting (10:00)

2. Roll call of delegates

Preliminary list of attendees
Doc. ISO/TC 8/SC 3 N 188*

Membership of ISO/TC 8/SC 3
Doc. ISO/TC 8/SC 3 N 189

3. Adoption of the agenda
Doc. ISO/TC 8/SC 3 N 187

4. Appointment of the drafting committee

5. Report of the Secretariat

Report of 18th ISO/TC 8 plenary meeting in Tokyo, Japan
Doc. ISO/TC 8 N 942 (PDF file - size: 683KB - This file requires freely available Acrobat Reader software)

Report from the 29th ISO/TC 8 AG meeting in Tokyo, Japan
Doc. ISO/TC 8/AG N 532 (PDF file - size: 330KB - This file requires freely available Acrobat Reader software)

Report of the 43rd session of IMO DE in London
Doc. ISO/TC 8/SC 3 N 190*

Report from the 30th th ISO/TC 8 AG meeting in Galati, Romaniathe Azores Islands
Scope, structure and programme of work of ISO/TC 8
Doc. ISO/TC 8 N 1000 (Revision to be determined)

Report on ISO/TC 8/SC 3 progress of work
Doc. ISO/TC 8/SC 3 N 191 Rev. 1

6. ISO/TC 8/SC 3 Programme of work
Doc. ISO/TC 8/SC 3 N 191 Rev. 1

6.1 Reports on the progress of working groups
Doc. ISO/TC 8/SC 3 N 192*

6.1.1 WG 1 - Piping and ducting systems -– Identification colours
Doc. ISO/TC 8/SC 3 N 192*, Annex A

a) ISO/FDIS 14726-1 - Ships and marine technology -– Identification colours for the content of piping systems - Part 1: Main colours and media

b) ISO/CD 14726-2 - Ships and marine technology - Identification colours for the contents of piping systems - Part 2: Additional colours for different media and/or functions

6.1.2 WG 2 - Incinerators on board ships
Doc. ISO/TC 8/SC 3 N 192, Annex B

ISO/DIS 13617 -– Shipbuilding Ships and marine technology -– Shipboard incinerators – Requirements
(Revision of ISO 13617:1995)

6.1.3 WG 3 - Ship machinery
Doc. ISO/TC 8/SC 3 N 192*, Annex C

ISO/WD 16288 - Ships and marine technology - Mechanical seals for shipboard pump applications

6.1.4 WG 4 - Epoxy resin fiberglass pipe and fittings for shipboard use
Doc. ISO/TC 8/SC 3 N 192*, Annex D

ISO/WD 15840 - Ships and marine technology - Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications

6.1.5 WG 5 - Pressure/vacuum valves for cargo tanks
Doc. ISO/TC 8/SC 3 N 192*, Annex E

ISO/FDIS 15364 - Ships and marine technology - Standard for pressure/vacuum valves for cargo tanks

6.1.6 WG 6 - Potable water systems and drainage systems
Doc. ISO/TC 8/SC 3 N 192*, Annex F

a) ISO/DIS 15748-1 - Ships and marine technology - Drinking water supply systems on ships - Part 1: Planning and design

b) ISO/DIS 15748-2 - Ships and marine technology - Drinking water supply systems on ships - Part 2: Method of calculation

c) ISO/CWD 15749-1 - Ships and marine technology - Drainage systems on board ships - Part 1: Sanitary drainage systems design

d) ISO/CWD 15749-2 - Ships and marine technology - Drainage systems on board ships - Part 2: Drain lines in gravity systems

e) ISO/CWD 15749-3 - Ships and marine technology - Drainage systems on board ships - Part 3: Drain lines in vacuum systems

f) ISO/CWD 15749-4 - Ships and marine technology - Drainage systems on board ships - Part 4: Sewage disposal pipes

g) ISO/CWD 15749-5 - Ships and marine technology - Drainage systems on board ships - Part 5: Drainage of decks, cargo holds and swimming pools

6.1.7 WG 7 - Heating, ventilation and air conditioning
Doc. ISO/TC 8/SC 3 N 192*, Annex G

ISO/DIS 7547 - Ships and marine technology - Air conditioning and ventilation of accommodation spaces on board ships -– Design conditions and basis of calculations (Revision of ISO 7547:1985)

ISO/DIS 9785 – Ships and marine technology - Ventilation of cargo spaces where internal combustion engined vehicles may be driven - Calculation of theoretical total airflow required (Revision of ISO 9785:1990)

6.1.8 WG 8 - Piping systems
Doc. ISO/TC 8/SC 3 N 192*, Annex H

a) ISO/CDAWI 15837 - Ships and marine technology - Standard specification for performance of gasketed mechanical couplings for use in piping applications

b) ISO/CD 15838 - Ships and marine technology - Standard specification for the performance of fittings for use with gasketed mechanical couplings used in piping applications

6.1.9 WG 9 – Oil systems
Doc. ISO/TC 8/SC 3 N 192*, Annex I

ISO/AWI 18770 – Ships and marine technology – engine room fuel oil systems – Guidelines for the prevention of oil fuel leakage

6.2 Reports of progress on other projects
Doc. ISO/TC 8/SC 3 N 192*

6.2.1 ISO/DIS 3715-1 – Ships and marine technology - Propulsion plants for ships –
Part 1 : Terms and definitions for geometry of propellers (Revision of ISO 3715:1978)

6.2.2 ISO/DIS 3715-2 – Ships and marine technology - Propulsion plants for ships –
Part 2 : Terms and definitions for controllable pitch propeller plants (Revision of ISO 3715:1978)

6.2.3 ISO/DIS 5483 -– Shipbuilding Ships and marine technology - Drain plugs, welding rings, and gaskets for oil and water drain screws (Revision of ISO 5483:1977)

6.2.4 ISO/AWI 19921– Ships and marine technology - Fire resistance of pipeline components – Test methods

6.2.5 ISO/AWI 19922 – Ships and marine technology – Fire resistance of pipeline components – Requirements imposed on the test bench

6.3 Periodic review of published standards
Doc. ISO/TC 8/SC 3 N 193*

7. Possible new work item proposals

7.1 Possible proposals identified from previousto date meetings
ISO/TC 8/SC 3 N 191

7.2 Projects of interest to IMO
ISO/TC 8 N 1000 Annex A

7.3 Projects assigned to ISO/TC 8/SC 3
Doc. ISO/TC 8/SC 3 N 194*

8. ISO/TC 8/SC 3 structure

8.1 Review of working group task assignments and possible need for additional working groups
Doc. ISO/TC 8/SC 3 N 191

8.2 Participation in working groups

9. Identification of liaison organizations
Doc. ISO/TC 8/SC 3 N 195

9.1 External liaisons with other international organizations

9.2 Internal liaisons with other ISO committees and subcommittees

10. Requirements concerning a subsequent meeting

11. Any other business

11.1 Electronic working environment in ISO/TC 8/SC 3
Doc. ISO/TC 8/SC 3 N 157 Rev 1*

11.2 ISOTechnical Management Board decisions
Doc. ISO/TC 8/SC 3 N 196*

11.3 Status of the Secretariat
Doc. ISO/TC 8/SC 3 N 197*

12. Approval of resolutions