Home
- NSF
- ENG
- EEC
- I/UCRC Program
Information and Communications
Fabrication & Processing Technology
Qualtiy, Reliability, & Maintenance
Particulate Materials Center
The Pennsylvania State University
A National Science Foundation Industry/University Cooperative Research Center since 1995
Improving the processes underlying the production of powders and manufacturing with particulate materials
Center Mission and Rationale
Powder synthesis, dispersion, grinding, agglomeration, and sintering are
common unit operations in many particulate-based materials manufacturing
industries such as protective coatings; composites; photography; cosmetics;
pharmaceuticals; electronic, magnetic, optical, and structural applications;
and others. Companies producing powders or manufacturing finished particulate
materials share a common need for improved process consistency, efficiency,
and reliability. The Particulate Materials Center was established to assist
industry in achieving this goal by research into various stages of particulate
materials manufacturing and processing, establishing educational programs
for undergraduate and graduate students, and creating knowledge-transfer
opportunities for industry. The research program seeks to improve particulate-based
manufacturing by: 1) developing new techniques for characterizing particle
behavior at all levels of manufacture, 2) developing computational tools
for efficient process simulation and evaluation, and 3) implementing these
methods to obtain advanced process understanding and improved product
manufacture. Information is transferred to member companies through biannual
meetings, visits, workshops, short courses, and future employees. The
highly interdisciplinary PMC faculty appointments span the Colleges of
Agricultural Sciences, Earth and Mineral Sciences, Engineering, Science,
and Penn State's Interdisciplinary Materials Research Institute.
Research Program
The seven primary PMC research thrusts are:
-
Colloidal and Interfacial Chemistry -- Overall objectives
are to establish methods for assessment and prediction of chemical-mechanical
polishing behavior; and to develop computational codes for prediction
of colloid behavior, including metals, polymers and complex metal oxides
and hydroxides used for electronic applications. Thermodynamic, as well
as kinetic, rate effects are investigated.
- Electrophoretic Deposition -- Multilayer processing is vital to applications with electroceramic and electrooptic materials. Electrophoretic deposition (EPD) is an innovative submicron technique offering significant advantages over primitive screen printing methods. Significant EPD technology includes: dispersion of nanosized particles in non-aqueous solvents with zeta potentials as high as 60 to 100 mV; and development of apparatus to obtain prototyping tapes with a continuous process. One of the thrusts is the development of a fundamental understanding in depositing nanoparticulates.
- Nanomaterials -- The overarching goal is to produce non-agglomerated nanocrystalline ceramic powders that have superior dispersibility and sinterability processability over the presently available agglomerated varieties. Two major sources of agglomeration have been researched: 1) chemical interactions between particle surfaces, and 2) dissolution of ions from a particle surface. Research relates nanopowder solubility and surface chemistry to mechanical attributes such as strength, size, and structure of agglomerates. Innovative deaggregation methods developed by PMC projects are patent pending.
- Powder Mechanics -- Reliable, rapid, real-time and automated test devices are being developed. Principle research objectives are: to augment powder storage, flow, and compaction processes; to develop and validate a PC-based powder compression model; and, to develop correlations between powder deposition methods, constitutive parameters, and compact quality. Prediction of new formulation performance and minimization of defects are determined. An efficient version of the finite element model is being developed for a PC environment with potential to become a benchtop analytical tool.
- Sinter Systems -- The ultimate goal is to develop tools that will reduce pressing defects and increase the efficiency of powder pressing operations. Predictive software is developed that incorporates all stages of the press and sinter operation, from the selection and blending of powder, binder, plasticizers and lubricants, through the quick, accurate design of tooling and the evaluation of dimensional changes that occur during sintering.
- Solution Synthesis -- Large-scale solution synthesis of monodisperse metal and metal oxide powders is developed. Research includes: development of technologically useful materials through post-synthesis processing of gel-sol-derived powders and pigments; synthesis of a wide variety of simple and complex oxides; and utilization of elevated temperatures to enhance particle formation rate. The effects of additives on particle shape, particle size, and crystal phase modifiers are investigated.
- Spray Formation -- Particle production processes are investigated through which a solution or slurry is atomized into discrete aerosol droplets and subsequently transported through a time/temperature/atmosphere-regulated environment. Goals are: to improve the properties of powders used in powder pressing and other processing operations; and to correlate slurry parameters and spray drying conditions to the properties of spray dried particles. Advancements include a new effort to synthesize submicron and nanoscale organic and inorganic particles using a variety of approaches, in some cases forming spherical particles from solution precursors.
PMC Outreach
Particle Characterization Laboratory (PCL) -- The PCL is a state-of-the-art
user facility for characterization facility for of routine and complex
powders, characterization, industrial short-course training, and student
education. The facility was established to assist industrial partners
and to support PMC research activities. The PCL is supplemented by equipment
manufacturers' equipment donations supporting PMC research and education.
Specialized characterization is provided via additional extensive materials
characterization facilities on campus.
Education -- Industrial members' dues go
directly to support
M.S.- and Ph.D.-level research projects. The Center also supports an Undergraduate
Research Fellowship program through which students work on research projects
generated by industrial sponsors. PMC biennially organizes the Fine Powder
Processing International Conference, designed to educate the world materials
community about powder processing and manufacturing issues.
Knowledge Transfer -- The PMC regularly organizes short courses, seminars, and conferences in topical areas consistent with the research program and member interests. Program topics include Applied Powder Mechanics, Colloidal and Interfacial Chemistry, Powder Characterization, and others under development. Programs can be tailored for in-house use for interested companies.
Center Headquarters
Particulate Materials Center
The Pennsylvania State University
249 Materials Research Institute
University Park, PA 16802
Tel (814) 863-6156 * Fax (814) 863-9704
Homepage: www.mri.psu.edu/centers/pmc/
Center Director: Dr. James H. Adair
jadair@mrl.psu.edu
Center Staff Assistant: Ms. Antoinette Love
ael10@psu.edu
Center Evaluator: Mr. Stephen L. McGregor
(814) 865-9519 * slm5@psu.edu
|
|
|
||||||||||||||||
