This electronic document was downloaded from the GPO web site, August 2002,
and is provided for information purposes only. The Code of Federal Regulations,
Title 21, is updated each year in early summer.
The most current version of the regulations may be found at the
GPO web site or from the current
printed version.
[Code of Federal Regulations]
[Title 21, Volume 1]
[Revised as of April 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 21CFR74.1322]
[Page 406-407]
TITLE 21--FOOD AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN
SERVICES
PART 74--LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION--Table of Contents
Subpart B--Drugs
Sec. 74.1322 D&C Red No. 22.
(a) Identity. (1) The color additive D&C Red No. 22 is principally
the disodium salt of 2',4',5'7'-tetrabromofluorescein (CAS Reg. No.
17372-87-1) and may contain smaller amounts of the disodium salts of
2',4',5'-tribromofluorescein and 2',4',7'-tribromofluorescein. The color
additive is manufactured by alkaline hydrolysis of 2',4',5',7'-
tetrabromofluorescein. 2',4',5',7'-Tetrabromofluorescein is manufactured
by brominating fluorescein with elemental bromine. The fluorescein is
manufactured by the acid condensation of resorcinol and phthalic acid or
its anhydride. Fluorescein is isolated and partially purified prior to
bromination.
(2) Color additive mixtures for drug use made with Red No. 22 may
contain only those diluents that are suitable and that are listed in
part 73 of this chapter as safe for use in color additive mixtures for
coloring drugs.
(b) Specifications. The color additive D&C Red No. 22 shall conform
to the following specifications and shall be free from impurities other
than those named to the extent that such impurities may be avoided by
current good manufacturing practice:
Sum of volatile matter (at 135 deg.C) and halides and sulfates
(calculated as soduim salts), not more than 10 percent.
Water-insoluble matter not more than 0.5 percent.
Disodium salt of phthalic acid, not more than 1 percent.
Sodium salt of 2-(3,5-Dibromo-2,4-dihydroxybenzoyl)benzoic acid, not
more than 0.5 percent.
2',4',5',7'-Tetrabromofluorescein, ethyl ester, not more than 1 percent.
Brominated resorcinol, not more than 0.4 percent.
Sum of disodium salts of mono- and dibromofluoresceins, not more than 2
percent.
[[Page 407]]
Sum of disodium salts of tribromofluoresceins, not more than 25 percent.
Disodium salt of 2',4',5',7'-Tetrabromofluorescein, not less than 72
percent.
Lead (as Pb), not more than 20 parts per million.
Arsenic (as As), not more than 3 parts per million.
Mercury (as Hg), not more than 1 part per million.
Total color, not less than 90 percent.
(c) Uses and restrictions. The color additive D&C Red No. 22 may be
safely used for coloring drugs generally in amounts consistent with
current good manufacturing practice.
(d) Labeling. The label of the color additive and any mixtures
prepared therefrom intended solely or in part for coloring purposes
shall conform to the requirements of Sec. 70.25 of this chapter.
(e) Certification. All batches of D&C Red No. 22 shall be certified
in accordance with regulations in part 80 of this chapter.
[47 FR 53846, Nov. 30, 1982]