This electronic document was downloaded from the GPO web site, September 2002, and is provided for information purposes only. The Code of Federal Regulations, Title 21, is updated each year in early summer. The most current version of the regulations may be found at the GPO web site or from the current printed version.

[Code of Federal Regulations]
[Title 21, Volume 1]
[Revised as of April 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 21CFR74.1334]
 
[Page 409-410]
 
                        TITLE 21--FOOD AND DRUGS
 
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN
                                SERVICES
 
PART 74--LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION--Table of Contents
 
                            Subpart B--Drugs
 
Sec. 74.1334  D&C Red No. 34.
 
    (a) Identity. (1) The color additive D&C Red No. 34 is principally
the calcium salt of 3-hydroxy-4-[(1-sulfo-2-naphthalenyl)azo]-2-
naphthalene-carboxylic acid.
    (2) Color additive mixtures for drug use made with D&C Red No. 34
may contain only those diluents that are suitable and that are listed in
part 73 of this chapter as safe for use in color additive mixtures for
coloring externally applied drugs.
    (b) Specifications. D&C Red No. 34 shall conform to the following
specifications and shall be free from impurities, other than those
named, to the extent that such other impurities may be avoided by good
manufacturing practice:
 
Sum of volatile matter (at 135 deg.C) and chlorides and sulfates
(calculated at sodium salts), not more than 15 percent.
2-Amino-1-naphthalenesulfonic acid, calcium salt, not more than 0.2
percent.
3-Hydroxy-2-naphthoic acid, not more than 0.4 percent.
 
[[Page 410]]
 
Subsidiary colors, not more than 4 percent.
Lead (as Pb), not more than 20 parts per million.
Arsenic (as As), not more than 3 parts per million.
Mercury (as Hg), not more than 1 part per million.
Total color not less than 85 percent.
 
    (c) Uses and restrictions. The color additive D&C Red No. 34 may be
safely used for coloring externally applied drugs in amounts consistent
with good manufacturing practice.
    (d) Labeling. The label of the color additive and any mixtures
prepared therefrom intended solely or in part for coloring purposes
shall conform to the requirements of Sec. 70.25 of this chapter.
    (e) Certification. All batches of D&C Red No. 34 shall be certified
in accordance with regulations in part 80 of this chapter.


Color Additive Regulations
Foods Home   |   FDA Home   |   Search/Subject Index   |   Disclaimers & Privacy Policy   |   Accessibility/Help