Skip navigation | ||
|
||
Medical Encyclopedia |
|
Other encyclopedia topics: | A-Ag Ah-Ap Aq-Az B-Bk Bl-Bz C-Cg Ch-Co Cp-Cz D-Di Dj-Dz E-Ep Eq-Ez F G H-Hf Hg-Hz I-In Io-Iz J K L-Ln Lo-Lz M-Mf Mg-Mz N O P-Pl Pm-Pz Q R S-Sh Si-Sp Sq-Sz T-Tn To-Tz U V W X Y Z 0-9 |
Contents of this page: | |
Alternative names
FPADefinition Return to top
This is a blood test that measures the level of fibrinopeptide a, which is a substance released as part of the clotting process. An elevated level may indicate an abnormal clotting process, such as disseminated intravascular coagulation (DIC).How the test is performed Return to top
Blood is drawn from a vein, usually on the inside of the elbow or the back of the hand. The puncture site is cleaned with antiseptic, and an elastic band is placed around the upper arm to apply pressure and restrict blood flow through the vein. This causes veins below the band to fill with blood.
A needle is inserted into the vein, and the blood is collected in an air-tight vial or a syringe. During the procedure, the tourniquet is removed to restore circulation. Once the blood has been collected, the needle is removed, and the puncture site is covered to stop any bleeding.
For an infant or young child, the area is cleansed with antiseptic and punctured with a sharp needle or a lancet. The blood may be collected in a pipette (small glass tube), on a slide, onto a test strip, or into a small container. Cotton or a bandage may be applied to the puncture site if there is any continued bleeding.
The sample is then taken to the laboratory for examination.
How to prepare for the test Return to top
No special preparation is necessary.How the test will feel Return to top
When the needle is inserted to draw blood, some people feel moderate pain, while others feel only a prick or stinging sensation. Afterward, there may be some throbbing.Why the test is performed Return to top
Measurement of fibrinopeptide a may help diagnose severe, abnormal clotting processes, such as disseminated intravascular clotting, that occur without generalized symptoms.Normal Values Return to top
The level of fibrinopeptide a should be in the range of 0.6 to 1.9 mg/ml.
Note: mg/ml = milligram per milliliter; The range of normal values varies between laboratories, and the laboratory performing the test should therefore be consulted for interpretation of the test result.
What abnormal results mean Return to top
Increased fibrinopeptide a levels may indicate:What the risks are Return to top
Risks associated with having blood drawn are slight:Special considerations Return to top
Veins and arteries vary in size from one patient to another and from one side of the body to the other. Obtaining a blood sample from some people may be more difficult than from others. Update Date: 9/3/2003 Updated by: Michael C. Milone, M.D., Ph.D., Department of Pathology and Laboratory Medicine, University of Pennsylvania Medical Center, Philadelphia, PA. Review provided by VeriMed Healthcare Network.
Home | Health Topics | Drug Information | Encyclopedia | Dictionary | News | Directories | Other Resources | |
Copyright | Privacy | Accessibility | Selection Guidelines U.S. National Library of Medicine, 8600 Rockville Pike, Bethesda, MD 20894 National Institutes of Health | Department of Health & Human Services |
Page last updated: 28 October 2004 |