NEMI Method Summary

Method Summary Information

Method Number: 1653 Media: WATER
Revision: Revision A, August 1997
Method Source: U.S. EPA Engineering and Analysis Division
Subcategory: ORGANIC Analytes in this method
Official Name: Chlorinated Phenolics in Wastewater by In Situ Acetylation and GCMS
Descriptive Name Chlorinated Phenolics associated with the pulp and paper industry wastewater by GCMS
Source Info: 4303 USEPA Headquarters
Ariel Rios Building
1200 Pennsylvania Avenue, N. W.
Washington, DC 20460
Citation: EPA Method Guidance CD-ROM (includes MCAWW Methods, and most current EPA Methods)
  Byte file
Brief Method
Summary:
 A 1-L sample is spiked with stable isotopically labeled analogs of the compounds of interest and an internal standard. The solution is adjusted to a neutral pH and a potassium carbonate buffer is added and then raised to 9-11.5. The chlorophenolics are converted in situ to acetates by the addition of acetic anhydride. The solution is extracted with hexane. The extracted is concentrated to a final volume of 0.5 mL and an instrument internal standard is added to the extract. The extract is then analyzed by a GCMS. The labeled compounds and internal standard serve to correct the variability of the analytical technique.
Scope And
Application:
 This is a GC-MS method that determines the quantity of chlorinated phenolics (chlorinated phenols, guaiacols, catechols, vanillins, syringalehydes) and other compounds associated with CWA, RCRA, and CERCLA, which are amenable to in situ acetylation, extraction, and analysis by GC-MS. The target analytes of interest are specifically associated with the pulp and paper industry. This method is designed to meet the survey and monitoring requirements of the EPA.
Applicable
Conc Range:
 MDL to 1000 ug/L (depending on interferences).
Interferences: (A) Contamination of glassware: Glassware should be scrupulously cleaned, solvent rinsed and baked at 450oC for a minimum of one hour.
(B) Co-extraction: High levels of non-chlorinated phenols may cause poor recovery of the compounds of interest, particularly in samples collected in the vicinity of a source of creosote.
(C) Degradation: Catechols are susceptible to degradation by active sites on injection port liners and columns, and are subject to oxidation to the corresponding chloro-o-benzoquinones. A small amount of ascorbic acid may be added to samples to prevent auto-oxidation. The addition for pulp and paper industry samples applies to effluent samples only. The internal standard, 3,4,5-trichlorophenol, has been reported to be an anaerobic degradation product of 2,3,4,5-tetrachlorophenol and/or pentachlorophenol. If an interference occurs, labeled pentachlorophenol or another labeled compound may be used as an alternative internal standard; otherwise all standards and reference compounds must be used as specified in this method.
(D)Blank Contamination: Blank contamination by pentachlorophenol has been reported to be traceable to potassium carbonate. Potential contamination may be removed by baking overnight at 400 to 500oC.
QC Requirements: Initial demonstration of laboratory capability, analysis of samples spiked with labeled compounds to evaluate and document data quality and the periodic analysis of laboratory reagent blanks, fortified blanks, and other laboratory solutions as a continuing check on performance.
Sample Handling: Samples should be collected in a 1-L amber bottle with a PTFE liner and stored from the sunlight. All sampling bottles are to be lot-certified to be free of chlorophenolics by running blanks according to this method. If the bottles and/or liners without cleaning or fewer cleaning steps show no detectable chlorophenolics, the bottle and liner cleaning steps that do not eliminate chlorophenolics may be omitted. Samples should be refrigerated at 0-4oC prior to and after. If residual chlorine is present, add 1 ml of sodium thiosulfate solution per 2.5 ppm of free chlorine. Acidify all aqueous samples to a pH of < 2 with sulfuric acid.
Max Holding Time:
 Extract and acetylate within 30 days of collection
Analyze within 30 days of acetylation.
Sample Prep Met None.
Relative Cost: $201 to $400
5319
Page 1