This U.S. Courthouse expansion is a General Services Administration pilot sustainable design project. It will consume 43% less energy than a building designed according to DOE standards for energy efficiency. |
To promote wise energy and water use throughout the Federal government, agencies are showcasing cost-effective energy efficiency, water-conserving, and renewable energy technologies in their facilities.
Since 1995, FEMP has recognized many sites as Federal Energy Saver Showcases. A showcase plaque prominently displayed at each showcase site informs visitors that the government building they are entering uses energy and water, as well as taxpayer dollars, wisely.
Nominations
Winners of the 2004 Federal Energy Saver Showcase Awards have been selected. The Showcase awards will be presented at this year's Federal Energy and Water Management Award Ceremony on October 28, 2004.
Executive Order Requirements
To highlight these successful energy efficiency projects, Executive Order 13123 (EO 13123) (PDF 103 KB, 12 pp) requires that agencies designate "exemplary new and existing facilities with significant public access and exposure as showcase facilities to highlight energy or water efficiency and renewable energy improvements." The showcase program functions as a management strategy by assisting agencies in implementing the goals of EO 13123. When facilities are designated as showcases, agencies can receive assistance from FEMP and have the advantage of partnering with other agencies, energy services companies, utilities, and national laboratories. Download Acrobat Reader.
What are the benefits?
Showcasing facilities has considerable benefits:
- Increases awareness of energy-efficient and renewable energy technologies applicable to all Federal facilities.
- Facilitates technology transfer through partnerships between agencies, utilities, manufacturers, and others.
- Improves the quality of projects through design assistance to selected showcase facilities.
- Recognizes agencies for their efforts.
How is a site selected as a showcase?
The following guidelines are provided for designating buildings as showcase facilities:
- Buildings receive a high number of non-Federal visitors.
- Features of a project are replicable.
- Visitors can learn from site displays.
FEMP further suggests that the showcase sites have a resident energy champion, use innovative financing, and measure actual savings.
Showcase designation is not limited by location or technology. Showcases past and present have featured a wide variety of technologies at very different Federal sites across the country.
How is a showcase facility created?
Agencies can use the following steps to create showcase facilities:
- Identify facilities for showcase designation (required by EO 13123).
- Use or obtain a high-quality energy audit.
- Seek design assistance and develop partnerships.
What kinds of technologies are featured?
Many showcase projects have involved high-efficiency lighting retrofits or the installation of more efficient heating, ventilating, and cooling systems. Some projects have included the use of renewable energy technologies such as solar thermal systems for hot-water heating, as well as photovoltaics (PV) for electricity production. Building-integrated photovoltaics, which replace another integral building structural component with a similar component enhanced with built-in PV power, have been incorporated in several new construction projects.
Other new construction projects are also using passive solar design strategies that combine basic energy efficiency practices with building designs that maximize natural heating, cooling, and daylighting.
The concept of whole building design, which emphasizes the interdependency of building components, has also been incorporated into several new showcase facilities. Rather than being designed as distinct systems, building features are designed to work together to optimize overall building energy efficiency and improve worker productivity.
Federal facilities are also improving their water efficiency through installation of low-flow fixtures, water-efficient landscaping and irrigation methods, and water reuse and recycling, as well as other process and equipment changes.
How can agencies fund showcase facility projects?
FEMP suggests several methods to fund showcase facility projects:
- Energy Savings Performance Contracting—FEMP provides direct project assistance, broad policy guidance, and training materials.
- Utility incentives—FEMP works directly with other Federal agencies and utilities to ensure that individual facilities take maximum advantage of utility-sponsored financial and technical assistance programs.
- Agency appropriations and life-cycle cost-effectiveness—Agencies can use existing appropriations for investments in energy efficiency. Showcase facilities do not necessarily cost more; by considering life-cycle cost-effectiveness, the potentially higher capital costs of energy-efficient technologies can often be offset through lower operating and maintenance costs over the life of the equipment.
How does FEMP help agencies?
FEMP provides the following services to help agencies create showcase facilities:
- Design assistance—The design assistance program provides agencies with direct project implementation support and serves as the central focus for expanding the use of energy-efficient technologies and renewable energy in Federal facilities.
- SAVEnergy action plans—FEMP provides facility managers with specific action plans for installing conservation measures. The program helps agencies identify the best, most cost-effective energy, water, and renewable energy projects.
- Increased technology awareness—FEMP provides support to all Federal agencies to facilitate information transfer on energy and water resource management within the Federal and private sectors.
- Development of promotional materials—Federal agencies receive support through publications and electronic media that help facility managers make the best decisions on energy-saving opportunities.
- Interagency coordination—FEMP is the lead office for coordinating the implementation of EO 13123. It facilitates partnerships between agencies and the private sector to assist in leveraging funding and other services.
For More Information
Shawn Herrera
Design Assistance Program Manager
Federal Energy Management Program
202-586-1511
shawn.herrera@ee.doe.gov
Federal Energy Saver Showcase Award Winners
2004 Award Winners
2003 Award Winners
2002 Award Winners
2001 Award Winners
|
